Sökresultat för "Hazardous Materials"

At CERN, the European Organization for Nuclear Research, physicists and engineers are probing the fundamental structure of the universe. Using the world's largest and most complex scientific instruments, they study the basic constituents of matter - fundamental particles that are made to collide together at close to the speed of light. The process gives physicists clues about how particles interact, and provides insights into the fundamental laws of nature. Job Description Introduction As a Chemical Safety Engineer, you will join the HSE department, which supports CERN in the implementation and application of its Safety Policy. With the HSE department, you will join the OHS Group, which is in charge of providing advice, monitoring, and following up on the implementation and accomplishment of safety objectives, aimed at a continuous improvement of a safe working environment. Within this group, you will join the General Safety and Equipment Integrity (GI) section. You will be one of the CERN specialists for Chemical Safety, joining a multidisciplinary team of Safety experts. Functions: Provide advice and support, including for risk assessments, in the Chemical Safety domain. Perform safety verifications on installations and activities. Provide support in the definition of requirements for the compliant transport of dangerous goods. Provide support in safety audits, technical reviews, and projects. Check the conformity to safety requirements of the engineering and tendering specifications. Write CERN Safety documentation including rules, instructions, and guidelines. Design and deliver safety training in collaboration with the CERN Safety Training service. Qualifications Master's degree or equivalent relevant experience in the field of Chemical Engineering, Chemistry or a related field. Experience: Demonstrated experience in managing chemical safety engineering aspects of large-scale industrial facilities or projects. Demonstrated experience in providing advice and support on chemical and biological hazards, including the transport of dangerous goods. Knowledge of relevant European regulations or equivalent national standards for the chemical safety domain. Technical competencies: Occupational safety and risk management, knowledge of chemical risks and protection. Occupational safety and risk management, including hazard identification and analysis, risk assessment and compensatory measures definition. Knowledge of personal protective equipment. Safety conformity assessment. Behavioural competencies: Achieving Results: having a structured and organised approach towards work; being able to set priorities and plan tasks with results in mind. Communicating Effectively: ensuring that information, procedures and decisions are appropriately documented. Demonstrating Flexibility: adapting quickly and resourcefully to shifting priorities and requirements. Working in Teams: gaining trust and collaboration from others. Solving Problems: recognising what is essential; discriminating between important and peripheral information and being able to see the whole picture. Language skills: Spoken and written English or French, with a commitment to learn the other language. Additional Information Diversity has been an integral part of CERN's mission since its foundation and is an established value of the Organization. Employing a diverse workforce is central to our success. We welcome applications from all Member States and Associate Member States. This vacancy will be filled as soon as possible, and applications should normally reach us no later than 17.08.2026 at 23:59 CEST. Employment Conditions Contract type: Limited duration contract (5 years). Subject to certain conditions, holders of limited-duration contracts may apply for an indefinite position. Working Hours: 40 hours per week Job Flexibility: Hybrid This position involves: - Work in Radiation Areas. - Interventions in underground installations. - A valid driving licence. - Work during nights, Sundays and official holidays, when required by the needs of the Organization. Job grade: 6-7 Job reference: HSE-OHS-GI-2026-160-LD Field of work: Health, Safety and Environment Benchmark Job Title: Health, Safety and Environment Engineer Global Benefits A competitive salary (tax free), increasing in line with your years of relevant experience. 30 days of paid leave per year plus 2 weeks annual closure. Coverage by CERN's comprehensive health insurance scheme (for yourself, your spouse and children), and membership of the CERN Pension Fund. Family, child and infant monthly allowances depending on your individual circumstances. A relocation package (installation grant, removal, travel expenses) depending on your individual circumstances. Possibility to extend your contract up to 8 years + eligibility for indefinite contract tenure. Overview of CERN - Discover a world where the impossible is made possible! At CERN, the European Organization for Nuclear Research, we are pushing the frontiers of science and technology. Our groundbreaking work brings together not only physicists but also a diverse range of professionals from engineering, technical, scientific, and administrative fields. Together, we foster an environment where innovation and collaboration thrive. Every day, we face exciting new challenges and opportunities to contribute to cutting-edge research that shapes our understanding of the universe. We meet these challenges through the diverse perspectives within our teams, ensuring every contribution is valued and driving our shared sense of inclusion and purpose. Diversity is a core value of CERN since its foundation, and it remains central to our mission and continued success. If you are ready to be part of a dynamic, inclusive community pushing the boundaries of knowledge, CERN is the place where your curiosity and skills can thrive. Be part of our mission to uncover what lies at the heart of the universe! TAKE PART! More information about us, here: careers.cern

At SSC Space, we help Earth benefit from space. From satellite communications and rocket launches to advanced testing and space services, our work supports customers around the world and contributes to the future of space exploration. At Esrange Space Center in Kiruna, safety is at the heart of everything we do. Every launch, test and operation depends on thorough safety assessments and careful planning. As a Range Safety Officer Trainee, you will join our experienced Range Safety Office and learn how safety is managed for rocket, balloon and future satellite launch operations. Working alongside three experienced Range Safety Officers, you will gradually take part in safety reviews, risk assessments and regulatory work while building specialist knowledge in one of the world's most unique space environments. This is an excellent opportunity for someone at the beginning of their career who wants to develop into a specialist within mission safety and risk management. REQUIREMENTS We believe you are at the beginning of your career and have a strong interest in mission safety, risk management and the space industry. To succeed in this role, you have: A Bachelor's or Master's degree in Engineering, Aerospace Engineering, Physics or another relevant technical field. An interest in safety engineering, risk analysis or mission assurance. Strong analytical skills and the ability to evaluate complex technical information. A structured way of working and good communication skills. A proactive attitude and willingness to learn from experienced specialists. Fluency in both Swedish and English. A valid driver's license. It is considered an advantage if you have knowledge or experience in one or more of the following areas: Safety work in high-risk or highly regulated environments. Handling of hazardous materials or explosives. Rocket or balloon trajectory modelling. Aerospace regulations. Flight termination systems. Risk analysis or systems engineering. RESPONSIBILITIES Support the Range Safety Office in reviewing flight and ground safety analyses for missions conducted at Esrange Space Center. Assist in risk assessments and safety evaluations for rocket, balloon and future satellite launch operations. Contribute to the maintenance and continuous development of the Range Safety Office's processes, documentation and safety structure. Participate in regulatory and compliance work related to range safety and mission operations. Support communication with authorities and other stakeholders regarding safety-related matters. Work closely with experienced Range Safety Officers and gradually develop the competence required to independently contribute to safety reviews. Help promote a strong and consistent safety culture across SSC Space. BENEFITS We offer you A unique opportunity toget insight intodifferent safety critical missions conductedforthe Swedish and international space industry. An excellent opportunity for personal and career development. An exciting, international workplace characterized by an open atmosphere and proud employees all over the world. LOCATION This is a full-time, six-month fixed-term position (September–January) based at Esrange Space Center in Kiruna. FURTHER INFORMATION For questions regarding the position, you are welcome to contact: Marko Kohberg, Head of Safety +46 70 2952 444 Klas Nehrman, Team Lead Range Safety Office +46 76 764 8445 For questions regarding employment terms or union-related matters, you are welcome to contact our union representatives: Sveriges Ingenjörer: SverigesIngenjorer-AF@sscspace.com Unionen: unionen@sscspace.com NEXT STEPS If this opportunity sparks your interest, we encourage you to apply as soon as possible! You can submit your application up until 2026-08-16, which is the latest possible date for consideration. When applying, please include your CV. While you are welcome to include a brief personal note or letter, our evaluation will primarily focus on your skills and qualifications as outlined in your CV, ensuring a fair and unbiased recruitment process. Due to the summer holiday period, we will resume this recruitment in August. Feedback may therefore take longer than usual, and we appreciate your understanding during the summer. This is a security-classified position, and we will require a background check prior to employment. WE HELP EARTH BENEFIT FROM SPACE Swedish Space Corporation (SSC) is a leading global provider of advanced space services, with more than 50 years of experience. We help space organizations, research institutes, commercial and institutional actors from all over the world to get access to space. With local presence on all continents and about 800 committed employees, we offer specialist expertise in satellite communications and satellite control services, spacecraft operations, rocket and balloon systems, launch services and flight test services, as well as engineering, operations and consultancy services for space missions.  We help Earth benefit from Space. Learn more at sscspace.com

Do you want to make an impact in the transition towards safer and more sustainable products? Join an exciting role where you will work with environmental compliance, substance regulations, and material data management. About the role As an Environmental Compliance Engineer, you will support ensuring products meet global environmental and chemical compliance requirements. A key part of the role is to reduce a backlog of legacy components with missing or incomplete supplier compliance data. You will investigate components, review material declarations, and assess chemical compliance data related to RoHS, REACH, and PFAS, including interpretation of CAS numbers. Working closely with the Environmental Compliance team, R&D, Sourcing, suppliers, and external partners, you will help maintain accurate compliance data in PLM systems and support improvements in data quality and hazardous substance phase-out activities. The assignment is carried out at the client site while you are employed by Academic Work. Work tasks Review/validate supplier material declarations to support compliance with environmental and chemical regulations, incl. RoHS, REACH, and PFAS-related requirements Investigate and resolve missing or incomplete compliance data for legacy components by collaborating with suppliers, internal stakeholders, and external compliance partners Support the collection, verification, and maintenance of material and substance information to improve data quality within PLM systems Work closely with Environmental Compliance-team, R&D, Sourcing, and international suppliers to clarify technical information and ensure accurate compliance documentation Analyze chemical substance data, including CAS numbers and material compositions, and assess compliance against applicable regulatory and internal requirements Contribute to maintaining efficient compliance processes and support ongoing efforts to phase out hazardous substances We are looking for Fluent in English, written and spoken University degree in Environmental Science, Environmental Engineering, Chemistry, Chemical Engineering, Ecosystem Engineering, or a related field Basic knowledge of environmental and chemical regulations such as RoHS, REACH, PFAS restrictions, and other relevant substance compliance requirements Understanding of chemical information, including the ability to interpret material compositions and CAS numbers Good knowledge in Microsoft Excel and strong general system skills A structured and detail-oriented way of working, with the ability to perform investigative work and follow up on missing or incomplete compliance information A proactive mindset and the ability to drive activities forward by coordinating and following up with R&D, suppliers, and other stakeholders It is meritorious if you have Proficiency in Swedish, both written and spoken Experience from the manufacturing, electronics, or IT/Software industries Experience reviewing material declarations, supplier compliance documentation, and chemical substance data Experience working with hazardous substance assessment and phase-out activities in products Experience working with PLM systems and compliance databases such as Green Data Manager, Assent, or similar tools Experience contributing to improvements of compliance processes, data quality, and system workflows To succeed in the role, your personal skills are: Change oriented Goal oriented Orderly Responsible

Lunds universitet grundades 1666 och rankas återkommande som ett av världens främsta lärosäten. Här finns omkring 46 000 studenter och 8 500 medarbetare i Lund, Helsingborg och Malmö. Vi förenas i vår strävan att förstå, förklara och förbättra vår värld och människors villkor. För ursprunglig annons (på engelska) och ansökan, vänligen gå till: https://lu.varbi.com/en/what:job/jobID:953369/ Your team The General Safety Team is one of three teams within the Safety Group at MAX IV. The team consists of specialists in fire safety, chemical safety, laser safety, environmental protection, occupational health and safety, and machine safety. The team also manages physical protection and security at the MAX IV Laboratory. We collaborate closely with engineers, researchers, administrative staff, and technical personnel across the facility, providing expert guidance to ensure the safe design, procurement, commissioning, and operation of MAX IV. Together, we contribute to a proactive and integrated safety culture. Would you like to work at one of the brightest lightsources in the world? MAX IV is looking for an experienced Chemical Safety Coordinator to lead and further develop chemical safety at our world-class research facility. In this role, you will be responsible for maintaining and continuously improving our chemical safety management program, ensuring compliance with Swedish legislation and best practices. You will work closely with managers, researchers, project teams, and contractors, providing expert support on chemical risk management, training, permitting, and safe operational practices. This is a unique opportunity to combine scientific expertise with strategic safety work in an international research environment. Your main work tasks will be Lead the implementation, maintenance, and continuous improvement of the Chemical Safety Program at MAX IV. Ensure compliance with applicable Swedish and EU chemical legislation and regulations. Coordinate and support chemical risk management processes, including hazard identification, exposure assessments, substitution of hazardous chemicals (including CMR substances), and implementation of appropriate risk control measures. Develop and maintain organizational procedures, standards, and guidance for the safe purchasing, handling, storage, transport, labelling, and disposal of chemicals. Own and administer the chemical inventory management system, including governance, user support, training, and system documentation, while supporting line managers in fulfilling their responsibility to maintain accurate chemical inventories and registrations. Develop and deliver chemical safety training, guidance, and awareness initiatives for managers, employees, contractors, and other relevant stakeholders, including training in the chemical inventory management system and associated responsibilities. Plan and conduct inspections, audits, and follow-up activities to verify compliance with internal chemical safety requirements and applicable legislation, and drive continuous improvement. Coordinate and collaborate with internal and external stakeholders (including authorities, occupational health services, waste contractors, and other safety functions), on matters relating to chemical safety. To be successful in this role you need to have the following qualifications Extensive experience (8+ years) working as a chemical safety coordinator in industrial or scientific environments. Proven ability to work independently and lead chemical safety activities in a larger organisation. Documented experience in communicating chemical safety requirements and delivering training. Experience administering a chemical inventory management system. MSc. in Chemistry. Excellent proficiency in Swedish and English, both written and spoken. Below are seen as merits Experience from a Swedish university or research organisation in a similar role. Experience developing and implementing a chemical safety management program. Experience collaborating with scientists, engineers, and project managers in a research environment. PhD in Chemistry or another relevant discipline. As a person you are someone who is proactive, structured, and confident in working both independently and collaboratively within multidisciplinary teams. You communicate clearly, build strong relationships across functions, and have a strong commitment to safety, quality, and compliance. You approach challenges thoughtfully and use your problem-solving skills effectively to find practical and sustainable solutions. What we offer When you join our MAX IV team, you step into a world of front edge science. We make the invisible visible by supporting scientist from all over the world, generating scientific results for the benefit of society. We offer you a multicultural work environment with great opportunities for personal development with respect for a healthy work-life balance. Would you like to work in a challenging and supporting environment? Then join us and take the opportunity to make a real difference! For further information, please visit: https://www.lunduniversity.lu.se/about-lund-university/work-lund-university www.sweden.se https://www.maxiv.lu.se/about-us/careers/compensation-benefits/ Probationary period may apply. MAX IV är ett nationellt forskningslaboratorium med Lunds universitet som värduniversitet. MAX IV tillhandahåller toppmodern utrustning för forskning inom områden som teknik, fysik, strukturbiologi, kemi och nanoteknik. MAX IV kommer att ta emot upp till 2 000 nationella och internationella forskare årligen, vilka genomför banbrytande experiment inom material- och biovetenskap med hjälp av det briljanta röntgenljuset. Vi undanber oss alla kontakter från annonsförsäljare, rekryterings- och bemanningsföretag på grund av statliga upphandlingsregler.

The European Spallation Source (ESS) will soon be the world’s most powerful source of neutrons, providing researchers with unique opportunities to explore the structure of materials at the atomic level. Neutron scattering at ESS will address critical questions in physics, chemistry, geology, materials science and life science.   About the role   Within the Science Directorate, the Scientific Support Division provides the ESS neutron science program with experimental support including sample environments, user laboratories, deuteration, and hall coordination in close collaboration with Instrument Divisions.   The Sample Environment group at ESS is preparing to support all ESS neutron instruments by developing, assembling and integrating a broad range of specialized equipment for achieving both very low and very high temperatures, high magnetic fields, high pressure, vacuum, gas or liquid flow, lasers, and in many cases, automated systems. Once ESS transitions into operations in early 2027, we will provide operational support for all sample environments on the instruments in close collaboration with scientists, as well as continuing the development of new sample environments. We are now seeking a Sample Environment Engineer to support the development, commissioning and the operations of high temperature furnaces, as well as related gas handling and pressurized gas systems. In this role, you will be responsible for delivering sample environment projects in these areas, working in close collaboration with other members of the Sample environment group as well as academic research groups to develop new equipment and provide operational support for early science experiments at ESS. As part of this role, you will specifically develop new sample environments in collaboration with the universities participating in the ESS Early Science Initiative project “Sustainable and functional materials from local resources” funded by the Swedish Research Council. Day-to-day, you will: Specify, design, develop and procure equipment for high temperature/gas handling and pressurized sample environment systems. Work with academic researchers to develop technical specifications and propose solutions and designs to meet scientific requirements. Assemble, integrate and commission sample environments and associated equipment. Install, operate, maintain and repair high temperature/gas handling/pressurized systems and related equipment. Collaborate with ESS instrument teams and academic user groups to establish specifications and priorities for new high temperature/gas handling/pressurized systems. Provide operational sample environment support for the ESS instruments including on-call support. Provide expert experiment safety reviews for user proposals and carry out safety testing of user-supplied equipment. Collaborate with ESS instrument teams, users, and sample environment groups at other large-scale facilities to further develop high temperature/gas handling/pressurized sample environment equipment and technologies. Participate in the setting-up, maintenance and operation of the sample environment workshops and facilities. This is a full-time, fixed-term position for around 3 years based at ESS Campus in Lund, Sweden. About you   You have up to an MSc level degree in an engineering subject (e.g. mechanical, materials or metallurgical engineering) with relevance to this position, which focuses on the development and practical realization of high temperature and pressurized gas handling systems for scientific measurements. Previous experience of design as well as hands-on work experience with high-temperature equipment and gas handling/pressurised gas systems is required. You also have previous experience of mechanical assembly, maintenance and repairs, as well as relevant knowledge of material behavior at high temperatures and hazards involved in pressurized gas systems.   Experience of developing scientific or technical equipment involving controlling or monitoring temperature, mass, gas pressure or other experimental parameters would be considered particularly beneficial for this role. Experience with additional techniques including vacuum welding, brazing, wiring, light sheet metal work, and tube bending is also regarded as a merit, as are basic machining skills. Knowledge of control systems and programming would be an advantage, but not a requirement. You are accustomed to working with scientists as well as technicians to define and deliver projects and support operating equipment. You take as much pride in designing engineering solutions to meet scientific requirements as providing hands-on practical solutions to equipment problems, and approach all tasks with a collaborative, service-oriented mind-set. You are eager to learn new things, adapt quickly, and interested in contributing across a variety of tasks besides your core area of competence. A genuine interest in designing as well as building, repairing, or improving experimental equipment is vital. Prior work in a sample environment group or large-scale facility working with high temperature furnaces would be considered a merit, but is not essential. To apply:   A career at ESS gives you the opportunity to contribute to the future discoveries within neutron science at a stunning, brand-new workplace filled with innovative minds and brilliant people from across the globe. We offer market competitive, individualised compensation which is differentiated according to role, responsibilities, individual skills, abilities and achievements as well as monthly pension contributions on top of your salary.   If you see yourself in what we’re looking for, provide your CV and motivation letter in English by clicking on “apply” and following the instructions. Please be aware that we can only accept direct applications made via the ESS website. The last date for receiving applications is August 14th. For further information regarding the position, please contact Talent Acquisition Specialist Sofie Berg on sofie.berg@ess.eu or Hiring Manager Hanna Wacklin-Knecht on hanna.wacklin-knecht@ess.eu     For more information regarding the ESS recruitment process in general, please follow this link: https://europeanspallationsource.se/careersFor trade union information, please contact Unionen representative Nerusha Naicker on Nerusha.Naicker@ess.eu or SACO/Swedish Association of Graduate Engineers representative Marc Kickulies at Marc.Kickulies@ess.eu

Job Scope Lyten is seeking a Production Engineer with a specialization in automated industrial (battery) productions. As a Production Engineer (Pilot Production) you will stabilize, scale, and continuously improve pilot‑line processes that span electrode manufacturing, cell assembly, and formation & aging. Your mission is to translate cell designs and lab recipes into robust, traceable processes ready for industrialization at Northvolt gigafactories. You will work closely together with production, process, quality, and automation engineers to make sure the production process is achieving the required stability and is ready for transfer to gigafactory scale. You will ensure process and equipment meet availability and reliability and resolve production issues with a sense of urgency. Key Responsibilities Overall areas of responsibilities and activities Key responsibilities include (but are not limited to) · Own pilot-line selected production steps across Wet- and Dry Electrode, Assembly and Formation & Aging processes. Defining, monitoring and improving Operation Parameter Ranges and control windows fit for the Labs pilot productions. · Collaborate with cross-functional teams to define production system requirements, select suitable hardware and software, and create robust solutions for production lines. · Follow data-driven production control methods, implementing SPC on CtQs and MSAs to ensure capability prior to scale-up. · Together with IT and Automation teams implement the necessary dashboards for OEE, FPY, scrap, downtime with Pareto’s and trends to facilitate progress tracking and root cause analysis. · Prepare and maintain Process Flow, PFMEA and work instructions as preparation for pilot productions. · Partner with Safety & Environment to validate process changes against standard requirements. · Own root-cause analysis on equipment and process performance improvements during A- and B-sample productions, following structured RCA methods. · Work hands-on with Cell Design, Materials, Maintenance & Automation, Supply chain and Operations on fast learning cycles and problem solving to increase production process maturity. · Review Engineering Design Documentation (Specifications, Design manufacturability). · Support and collaborate with project teams to select the most proficient equipment suppliers from an automation perspective. · Responsible for acceptance of the Site Acceptance Tests of equipment upon commissioning completion. · Organize and take part in internal training and workshops. · Cost estimations for projects and change requests. Provide input for quoting, planning works, and change orders. Accountability/Authorization · Budget responsibility: N · Direct reports: N · Work Environment responsibility: N Requirements Educational background and previous experience required for the role · Bachelor's or Master's Degree in Chemical, Mechanical, Manufacturing or Automation Engineering or equivalent fields. · 3-8 years of experience in high precision manufacturing or pilot/scale-up environments (battery, pharma, semiconductor, film/web coating or similar). · Lean SixSigma certification Green- or blackbelt is a plus. Qualifications and Experience · Hands-on experience as an engineer with roll-to-roll processes, discrete assembly, coating/drying, laser cutting/welding, in-line test methods (DCIR, HiPot, leakage test). · Proficient in DOE/SPC/MSA, PFMEA, structured RCA methods. · Experience with Design For Manufacturing, applied in industrial scale high-volume production processes. · Familiar with Dry-room operations, chemical handling and ATEX/CE compliance. · Experience with MES/SCADA/PLC datasets and basic scripting/querying for data analysis is a plus. · Experience with mechanical design using 3D CAD is a plus. Ability to travel to different Lyten’s factories and to supplier visits. Specific skills & Knowledge Knowledge of AIAG/VDA and ISO9xxx standards for mass production environments (APQP/PPAP). Knowledge of European Directives and relevant ISO, IEC, and safety standards. Good understanding of project and supplier management, and structured problem solving skills. Health, Safety & Environmental responsibility · Follow company policies and procedures · Use PPE according to safety rules · Report hazards and incidents

Gemkom Engineering and Machinery Filial is a newly established branch of the Turkish company Gemkom. It is a leading engineering and manufacturing company that operates in a number of areas and in various ways within the steel industry. We are participating in a project where Stegra AB establishes a steel mill in Norra Svartbyn in Boden where steel will be produced through an almost fossil-free process using hydrogen gas. Our mission is, among other things, to install machines used in steel production and includes work in mechanics, electronics and plumbing. We now want to employ Cleaners. The work tasks may include but are not limited to: Job Description · Clean offices, meeting rooms, reception areas, corridors, kitchens, dining areas, and other common spaces. · Sweep, vacuum, mop, and maintain floors in a clean condition. · Dust and wipe desks, furniture, shelves, windowsills, and other surfaces. · Empty waste bins and replace waste bags. · Clean and sanitize toilets, washrooms, and kitchen facilities. · Refill consumables such as soap, paper towels, toilet paper, coffee, tea, sugar, milk, and drinking water. · Prepare and serve tea, coffee, and other refreshments to employees, visitors, and guests as required. · Set up and maintain refreshment stations and meeting room catering before, during, and after meetings. · Wash and store cups, glasses, plates, and kitchen utensils. · Maintain cleanliness and hygiene of kitchenettes, coffee machines, refrigerators, microwaves, and other pantry equipment. · Monitor stocks of cleaning materials and pantry supplies and inform the Administration Department when replenishment is required. · Report maintenance issues, damages, or safety hazards to the Administration Department. · Use cleaning equipment and chemicals safely and in accordance with company procedures. · Follow all Health, Safety, and Environmental (HSE) policies and hygiene standards. · Perform any other reasonable duties assigned by the supervisor. Our headquarters are in Stockholm, and applications are received via the specified e-mail address.