Sökresultat för "Component Assembly"

Vill du arbeta i en modern produktionsmiljö där kvalitet, noggrannhet och samarbete står i fokus? Vi söker nu engagerade och teknikintresserade medarbetare till vår elektronikproduktion. Arbetsuppgifter I rollen kommer du bland annat att arbeta med: Komponentmontering lödning Testning och kvalitetskontroll av elektronikkort och produkter Slutmontering Felsökning och enklare reparationer vid behov Vi söker dig som Är noggrann, ansvarstagande och kvalitetsmedveten. Har god finmotorik och trivs med praktiskt arbete. Har erfarenhet av elektronikproduktion, komponentmontering eller lödning är meriterande, men inget krav. Vi erbjuder intern utbildning och upplärning för rätt person. Har lätt för att samarbeta och samtidigt kan arbeta självständigt. Är positiv, engagerad och vill bidra till ett gott arbetsklimat. Vi erbjuder Ett varierande arbete i ett växande företag. Introduktion och möjlighet till kompetensutveckling. Trevliga kollegor och en god arbetsmiljö. Möjlighet att utvecklas inom elektronikproduktion.

ABOUT THE ROLE X Shore is rebuilding operations and product development under new ownership. We are now looking for a Mechanical Engineering & Analysis Manager to lead the structural and mechanical integrity of our electric boats — ensuring that every hull, component, and assembly that leaves Nyköping is designed right, validated correctly, and built to last. This is a leadership role with deep technical ownership. You will guide a small engineering team, drive analysis and simulation work, and be the person who signs off that our mechanical solutions are both safe and manufacturable. The role is based on-site at our office and production facility in Nyköping. ROLE PURPOSE Own the mechanical engineering function — from concept validation and structural analysis through to production release — ensuring that X Shore boats are designed to specification, analysed to standard, and handed to production with complete and correct documentation. KEY RESPONSIBILITIES * Lead mechanical engineering and structural analysis activities across the X Shore product range * Own FEA (Finite Element Analysis) and CFD simulations — from setup through to results interpretation and design recommendations * Define and maintain engineering standards, tolerances, and material specifications * Review and approve drawings, 3D models, and engineering change orders * Manage product validation testing: define test plans, oversee execution, and sign off results * Work closely with production engineering to ensure designs are manufacturable and assembly-ready * Lead root cause analysis on field failures, warranty cases, and production non-conformances * Maintain the mechanical BOM structure and ensure drawing revisions are controlled and complete * Support supplier development — reviewing manufacturing capabilities and engaging on critical components * Build and develop a small team of mechanical engineers, setting clear priorities and technical standards * Contribute to design reviews, risk assessments, and certification activities (e.g. CE, RCD) TECHNICAL DEPTH — WHAT WE NEED X Shore builds high-performance electric boats in marine-grade aluminium and composite materials. The Mechanical Engineering & Analysis Manager must be able to go deep — not just manage the team, but own the analysis work and stand behind the results. * Define and execute FEA studies for hull structures, brackets, mounts, and drivetrain interfaces * Assess fatigue life, impact loads, and hydrostatic pressure scenarios relevant to marine certification * Interpret and challenge simulation outputs — know when results are credible and when the model needs revisiting * Specify and oversee physical testing that correlates with simulation work * Drive design-for-manufacture review: identify tolerance stack-ups, assembly constraints, and production risks before they reach the floor QUALIFICATIONS REQUIRED * Degree in Mechanical Engineering, Structural Engineering, Naval Architecture, or equivalent * Minimum 7 years of engineering experience, with at least 3 years in a lead or senior role * Hands-on FEA experience using commercial tools (e.g. ANSYS, Abaqus, Nastran, or similar) * Strong working knowledge of CAD — 3D modelling and drawing release in tools such as SOLIDWORKS or CATIA * Experience in metals and composites — material selection, joining methods, and manufacturing constraints * Documented experience leading engineering validation: test planning, execution, and sign-off * Fluent in English; Swedish is an advantage * Available to work on-site in Nyköping NICE TO HAVE * Background in marine, automotive, aerospace, or high-performance vehicle engineering * Experience with CE marking, RCD (Recreational Craft Directive), or ISO 12215 hull structural standards * Experience from a company in growth, transformation, or restart phase * Familiarity with Microsoft Dynamics 365 or similar ERP/PLM systems NON-NEGOTIABLES * Hands-on analysis capability — this role requires personal technical output, not just management * Rigorous approach to documentation — drawings, reports, and release notes are complete before sign-off * Speaks up early when a design has a structural risk, regardless of schedule pressure * Takes ownership of problems through to resolution — not just identification * Treats manufacturing constraints as design inputs, not afterthoughts * Comfortable leading in an environment where processes are still being built WHAT GOOD AND BAD LOOK LIKE WHAT GOOD LOOKS LIKE Design decisions are backed by analysis before production release Production raises a structural question — engineering has the answer the same day Test results correlate with simulation — deviations are explained Drawing revisions are controlled and complete — no ambiguity on the floor Field failures are root-caused with corrective action in place within two weeks Engineers know what they are working on, why, and what good looks like WHAT BAD LOOKS LIKE Designs released without structural validation Production finds structural issues during assembly Test data filed without interpretation or corrective action Multiple drawing versions in circulation simultaneously Failures are documented but never actioned Team direction unclear — priorities shift without explanation PERSONAL QUALITIES To succeed in this role we believe you: * Are technically rigorous and do not accept 'close enough' when precision matters * Lead by example — you still do the hard analysis work yourself * Are structured and clear in how you communicate engineering decisions * Build credibility with production and suppliers through sound technical judgement * Are comfortable in ambiguity and can create structure where little exists * Have strong drive and see problems through to resolution * Thrive in a small, fast-moving team where every person's contribution is visible KEY INTERFACES * Head of R&D — direct reporting line; alignment on technical direction, priorities, and resource * Production Engineering — design-for-manufacture review, assembly support, and non-conformance resolution * Procurement — supplier capability assessment, component specifications, and critical part qualification * Quality — validation testing, field failure analysis, and certification documentation * External suppliers and partners — manufacturing review, tooling sign-off, and prototype builds WHAT WE OFFER At X Shore you get the chance to be part of an exciting journey with significant responsibility and real impact. You will be a central figure in rebuilding the engineering function of a pioneering electric boat company — setting the technical standards that determine whether our boats are safe, reliable, and built right. This is not a caretaker role. It is a building role, and the standards you set today will shape the product for years to come.

We are looking for an enthusiastic student within Logistics, Production, or Engineering to help us look into future automation possibilities for our warehouse and production floor. Project Objective We want to understand how automation could improve our daily material flows. Your task will be to review our current processes and investigate whether solutions like automated guided vehicles (AGVs) or conveyor systems would be a good, practical fit for our company. What You Will Look Into: * Goods Receiving: Moving pallets from delivery trucks into the warehouse racks. * Production Area: Moving full component trays (PCB blisters) from SMD Line to Assembly stations, and returning empty trays. * Packing & Shipping: Moving packed pallets to the wrapping machine and then to storage. * Refilling Picking Zones: Making sure our picking areas and manual workbenches stay stocked with parts automatically. What You Will Do: * Walk the floor to map out our current workflows and spot where delays happen. * Look into existing market technologies that are user-friendly and reliable. * Help put together a basic cost-benefit overview to see if the investment makes sense. * Share your findings and suggestions with our team at the end of the project. Who We Are Looking For: * A student in Logistics, Industrial Engineering, Supply Chain, or a similar field (suitable for both Bachelor and College/YH students). * Someone who is curious about Lean, warehouse management, and new technology. * A proactive person who enjoys talking to people on the floor and working with real-world problems. * No prior industry experience required—just a willingness to learn! What We Offer: * A concrete, hands-on project with clear goals. * Regular support and friendly guidance from our logistics team. * A welcoming workspace right next to our operations.

About the Company At Avaron, you get the security of permanent employment combined with the variety of working at different customers. We place specialists across everything from tech, IT and industry to project management and business support – and whatever the assignment, you have a consultant manager who is there for you and your development. About the Role You will join an engineering environment in the automotive industry where media routing, cable harnesses, and related components play a key role in cab development. The focus of this assignment is media routing for the steering wheel, steering column, and lower storage area, where the right design choices affect quality, durability, cost efficiency, and production readiness. You will work in an agile setup with PI planning and sprint-based follow-up, in close collaboration with cross-functional teams, system owners, production, and suppliers. The role combines hands-on engineering work with coordination across several stakeholders, making it a strong opportunity for you who want to influence practical design solutions in a technically detailed product environment. Job DescriptionYou will verify media routing and cable lengths to support robust solutions, reduce unnecessary variants, and avoid scrap, excessive cable length, or wear-related issues. You will participate in design reviews and contribute with engineering input on routing, specifications, and implementation readiness. You will update and review drawings, prepare introductions linked to ECO, raise ECOs, and create the documentation needed to move changes forward. You will create MR, order parts, perform measurements, and verify that routing solutions meet specification. You will coordinate with suppliers and cross-functional teams to secure alignment, regulatory compliance, and production readiness. You will support production during test assembly, follow up outcomes, and drive corrections, improvements, and change requests when needed. You will act as the voice of the cable harness area and work closely with responsible stakeholders to find good long-term solutions during ongoing component changes. RequirementsRelevant degree or equivalent work experience Experience from large rollouts or implementations of projects Experience working in fast-moving environments Experience with ECO handling Fluent Swedish and English Nice to haveEngineering background Experience working closely with production and cable routing Experience participating in design reviews Experience updating and reviewing drawings Experience creating MR and ordering parts Experience with measurements and verifying that routing is according to specification Experience communicating with suppliers and other functions to create strong alignment Knowledge of PI planning or other agile ways of working Additional European languages What We OfferPermanent employment at Avaron AB Occupational pension Wellness allowance of SEK 5,000 per year Application Selections are made on an ongoing basis – apply as soon as you can.

About the Company At Avaron, you get the security of permanent employment combined with the variety of working at different customers. We place specialists across everything from tech, IT and industry to project management and business support – and whatever the assignment, you have a consultant manager who is there for you and your development. About the Role You will help shape electrical installations for next-generation transport solutions and new vehicle platforms. In this role, you turn functional, mechanical, manufacturing, service, quality, and cost requirements into robust cable harness routing solutions that work throughout the full product development cycle. You will work in a highly collaborative engineering environment with close contact across electrical design, mechanical design, manufacturing engineering, purchasing, and suppliers. This is a great opportunity if you want to influence vehicle design from early concept work to prototype, verification, and industrialization. Job DescriptionYou will design and develop cable harness routing solutions in CAD based on technical requirements and design standards. You will create and maintain 3D routing models and related design documentation. You will optimize routing with focus on packaging, robustness, manufacturability, serviceability, quality, and cost. You will collaborate closely with electrical architects, component owners, manufacturing engineering, purchasing, and suppliers to secure efficient installations. You will contribute technical solutions in design reviews during both concept and detailed design phases. You will perform tolerance analyses and assess installation feasibility in the vehicle environment. You will support prototype builds, verification activities, troubleshooting, and issue resolution during development and industrialization. You will manage engineering changes and help keep product documentation accurate and up to date. You will contribute to continuous improvement of design methods, standards, and ways of working. RequirementsBachelor's or Master's degree in Mechanical Engineering, Electrical Engineering, Mechatronics, or equivalent experience. Experience in cable harness routing or mechanical installation design. Experience working with 3D CAD systems, preferably CATIA V5 or CATIA 3DEXPERIENCE. Experience working in cross-functional product development teams. Understanding of Design for Manufacturing (DfM) and Design for Assembly (DfA). Fluent English and Swedish. Nice to haveExperience from the commercial vehicle or automotive industry. Experience with electrical distribution systems and cable harness architecture. Knowledge of PLM systems such as ENOVIA. Experience working with prototype builds and production support. Familiarity with automotive product development processes and development tools. Additional European languages. What We OfferPermanent employment at Avaron AB Occupational pension Wellness allowance of SEK 5,000 per year Application Selections are made on an ongoing basis – apply as soon as you can.

At Koenigsegg, we bring together curious minds and skilled engineers who share a passion for pushing technology forward. As part of our R&D team, you will work in a collaborative environment where ideas grow into world-class innovations. We are currently expanding our R&D team and are looking for Mechanical Design Engineering with experience in areas such as interior design, exterior design, vehicle systems and standard components and materials. The role offers the opportunity to contribute to the design and development of components and systems that define the performance, functionality, and quality of our cars. You will be surrounded by dedicated colleagues who value teamwork, precision, and creativity in every step of the process. Responsibilities You will be responsible for the design and development of components and systems within the R&D Engineering department. This will include all development phases from conceptual design to end of production, and will require close collaboration with all parts of the organization, including but not limited to; Prototype, Testing, Procurement, Production, Quality, CAE and Homologation departments. You will: Design mechanical systems & solutions with emphasis on performance and quality using a ‘first principles’ approach Generate 3D models, assemblies and 2D drawings using Catia V6 / 3DExperience Design and facilitate tests to verify component function and that requirements are met Carry out data analysis to perform root cause analysis, promote reliability and improve performance Assist in selecting and interacting with suppliers and technology providers to ensure quality and performance targets are met Work closely with the Prototype dept. during concept validation phase Provide technical support leading to successful introduction of components and systems into and throughout production Assist in the creation of design standards and help to enforce them within the team Mentor entry-level engineers Requirements: Masters degree in Mechanical Engineering or a related field 5+ years of experience in engineering design for Automotive/Aerospace or similar industries. Proven understanding of assembly design, DFM and durability of components 5+ years Advanced CAD capabilities (CATIA V5/V6 or 3DEXPERIENCE) Proven experience of working with FEA GD&T design and application Proof of previous design of components for state-of-the-art manufacturing methods Meritorious experience: Work experience from top tier automotive or motorsport industry Practical hands-on experience working with cars/racing or similar (either professional or hobby) Material science (material selection, heat treatment and surface treatments etc.) Vehicle Architecture and packaging Previous leadership experience Applications are reviewed on an ongoing basis, so don't wait to apply. We look forward to receiving your application! Koenigsegg is most known for building some of the fastest cars in the world; with almost all of our megacar technologies that are patented and made in-house by our almost 500 world-class technicians, engineers, sourcing experts, production craftsmen, and communicators. What we’ve created is a unique proving ground of engineering creativity that makes use of our breakthrough megacar development and legacy to push the boundaries of sustainable mobility technology. So, what’s next? We are on a universe-denting mission to develop the next generation of breakthrough tech and products. We are looking for outstanding, impactful, and authentic individuals to grow with us. Our ambitions are inspiring but will push the limits of what is possible – requiring one to work efficiently amid our cross-functional teams to execute at high-quality levels. The goal is clear: innovate and transform.

About the Company At Avaron, you get the security of permanent employment combined with the variety of working at different customers. We place specialists across everything from tech, IT and industry to project management and business support – and whatever the assignment, you have a consultant manager who is there for you and your development. About the Role You will help shape electrical installations for new vehicle platforms in a technically advanced R&D environment within the commercial vehicle industry. The role centers on designing cable harness routing solutions that work in the real world from concept to industrialization, while balancing function, packaging, quality, serviceability, manufacturability, and cost. You will work close to electrical and mechanical design, manufacturing engineering, purchasing, and suppliers to create robust installation solutions across the vehicle. This is a great opportunity if you enjoy turning complex engineering requirements into practical design decisions with visible impact on future products. Job DescriptionYou will design and develop cable harness routing solutions in 3D CAD based on technical requirements and established design standards. You will create and maintain 3D routing models and the related design documentation needed throughout the development process. You will optimize routing with regard to packaging, robustness, manufacturability, serviceability, and cost. You will collaborate with cross-functional stakeholders such as electrical architects, component owners, manufacturing engineering, purchasing, and suppliers. You will contribute technical solutions in design reviews during both concept and detailed design phases. You will perform tolerance analyses and assess installation feasibility to secure robust solutions. You will support prototype builds, verification activities, troubleshooting, and issue resolution during development and industrialization. You will manage engineering changes and help ensure accurate product documentation. You will contribute to continuous improvements in design methods, standards, and ways of working. RequirementsBachelor's or Master's degree in Mechanical Engineering, Electrical Engineering, Mechatronics, or equivalent experience. Experience in cable harness routing or mechanical installation design. Experience working with 3D CAD systems, preferably CATIA V5 or CATIA 3DEXPERIENCE. Experience working in cross-functional product development teams. Understanding of Design for Manufacturing (DfM) and Design for Assembly (DfA). Ability to work with both electrical and mechanical requirements in a structured product development environment. Swedish and English language skills. Nice to haveExperience from the commercial vehicle or automotive industry. Experience with electrical distribution systems and cable harness architecture. Knowledge of PLM systems such as ENOVIA. Experience supporting prototype builds and production-related activities. Familiarity with product development processes and tools used in vehicle development. What We OfferPermanent employment at Avaron AB Occupational pension Wellness allowance of SEK 5,000 per year Application Selections are made on an ongoing basis – apply as soon as you can.

What we do at Blykalla At Blykalla, we're transforming the future of nuclear power by developing innovative Small Modular Reactors (SMRs). Our mission is to create a new generation of nuclear energy systems that are safer, more efficient, and environmentally friendly. As Sweden's only developer of SMRs, we're at the forefront of a groundbreaking industry. The role You will take ownership of the steam generator - one of the most critical components in our SEALER reactor, sitting at the interface between the lead-cooled primary circuit and the power conversion system. You are the system-responsible engineer: defining what it must do, how it should be designed, and who builds it. The role spans the full engineering lifecycle — from writing requirements and leading trade-off studies, through detailed design, manufacturing coordination, and qualification. You will combine sharp mechanical engineering judgment with the ability to align people, suppliers, and analyses toward a common technical goal. What you'll get to do Your work spans three interconnected areas. On the requirements and design basis side, you will define the steam generator's functional and design requirements, develop and maintain the design basis documentation, and lead trade-off studies on configuration, materials, and manufacturing approaches. On the mechanical design side, you will drive decisions on component architecture, assembly sequences, weldability, inspectability, and manufacturability — making sure the design is practical to fabricate, transport, install, test, and maintain. On the thermal-hydraulic and structural side, you will not run complex simulations yourself, but you will be the one asking the right questions: defining calculation scopes, providing inputs to analysts, and critically reviewing results. You should be comfortable performing hand calculations to sanity-check outputs and steer design iterations. On the coordination side, you will define the scope and technical content of supplier work packages, evaluate proposals and deliverables from manufacturers, lead design reviews, and keep component development aligned with plant requirements and the project schedule — working across internal teams as well as academic and industrial partners. Who you’ll get to work with The System Engineer - Heat Transfer Equipment sits within our Fluid Systems Engineering team at Blykalla, reporting to Federico Barbano. You will collaborate closely with thermal-hydraulic analysts, mechanical and system engineers and procurement team — as well as external suppliers and research partners. We are a diverse team that is passionate about our work and about Blykalla. Who you are We are looking for a candidate with up to five years of professional experience. There are a few things we think will help you succeed in this role: Degree in mechanical, energy, chemical, nuclear engineering or a closely related discipline A meaningful portion of your experience spent at a heat exchanger or pressure equipment manufacturer - ideally in a role combining thermohydraulic and mechanical design with production engineering and workshop interface Strong working knowledge of heat exchanger mechanical design (ideally steam generators) and applicable design codes and standards such as ASME, PED, or RCC-M Thermal-hydraulic and heat transfer fundamentals sufficient to steer and critically review calculations performed by others - including the ability to perform hand calculations to sanity-check results Comfort writing clear technical specifications, reviewing deliverables critically, and communicating effectively with both internal colleagues and external suppliers Familiarity with CAD tools and engineering software Fluent in English, spoken and written Nuclear experience is welcome but not required — candidates from oil and gas, power generation, petrochemical, and similar industries are highly relevant. Meritorious Hands-on experience with steam generators or shell-and-tube heat exchangers Experience with FEA or CFD — the priority is the ability to define, commission, and review such analyses rather than execute them Prior experience coordinating multidisciplinary design work or managing supplier technical interfaces Background in the nuclear industry If you are not sure that you are 100% qualified but are up for the challenge, we encourage you to apply. Location This position is based at our office in Stockholm. So, what do you think? Take the chance to be at the forefront of revolutionizing nuclear power. Join and help us shape the energy landscape of tomorrow. Apply today with your resume and a cover letter highlighting your relevant experience and achievements. We offer competitive compensation aligned with our internal salary framework and growth potential in the role.

Our Mission At Vertical Aerospace, we are pioneering the way for electric aviation. The Valo, our eVTOL (electric, vertical, take-off and landing), 'zero emissions' aircraft will set a new safety standard for how we will navigate the sky. We won't realise our mission following the same legacy processes and traditions our predecessors followed, instead, we want to 'redefine' aerospace best practices. We are growing quickly from a prototype business to a scaling SME, and the next few years will be critical to our success and delivering on our ambitious goals. Valo is targeting airliner-level safety certification in 2029 ahead of entering service with our airline and operator customers. We're looking for an Advanced Structural Test Engineer to join our growing Test & Validation team. This is a hands-on engineering role where you'll take ownership of structural test campaigns from initial planning through to execution, analysis and reporting.   Working from our Kemble facilities, you'll play a key role in delivering the physical evidence required to support aircraft development and certification. You'll work across a broad range of structural testing activities, from component-level investigations through to large-scale certification programmes, collaborating closely with Design, Stress, Airframe and Certification teams.   What You'll Do * Lead the planning and execution of structural test campaigns across development and certification programmes * Own the setup, operation and troubleshooting of data acquisition and control systems, including MTS and LabVIEW platforms * Develop instrumentation strategies including strain gauge installation, rosettes, wiring, bonding and signal conditioning * Monitor test execution, validate real-time data and ensure safe and effective test delivery * Work closely with design and structural engineering teams to define test requirements and develop test rigs * Analyse test results and produce clear, traceable technical reports to support engineering and certification activities * Support the development and continuous improvement of testing processes, methodologies and standards * Mentor junior engineers and technicians, providing guidance on instrumentation, rig setup and test execution * Drive high standards of data quality, repeatability and technical excellence across all testing activities   What You'll Bring Essential * Degree in Mechanical Engineering, Aerospace Engineering or a related discipline * Experience within structural test engineering, ideally gained within aerospace or another highly regulated engineering environment * Strong knowledge of data acquisition and control systems, including MTS FlexTest and/or LabVIEW * Hands-on experience with strain gauge installation, wiring, bonding and troubleshooting * Strong understanding of load measurement systems, calibration techniques and signal behaviour * Experience planning and executing both development and certification test programmes * Ability to manage multiple priorities and work effectively in a fast-paced engineering environment Desirable * Experience supporting aerospace certification programmes under EASA and/or FAA regulations * Knowledge of rosette strain gauges, Wheatstone bridge circuits and signal noise reduction techniques * Understanding of uncertainty quantification and calibration traceability * Mechanical rig assembly and integration experience * Experience using MATLAB, Python, nCode or similar data analysis tools * Familiarity with CATIA V5, 3DEXPERIENCE or equivalent CAD software #LI-OS1 What can you expect from us? We're on a mission. Where others see limits, we see opportunity, and we work at pace. Working at Vertical isn't your average role but for those seeking a challenge, a flexible, supportive organisation and an incredible team; working here is an opportunity to do the best work of your career. Our approach promotes ingenuity and courage, while our environment builds success through diligence in safety and being open in the way we work. The only way we're going to assure the next chapter of aviation history is by working as a team, relentlessly, towards our goal.  Our benefits Our people matter - we're not going anywhere without them. Which is why our company benefits go beyond the essentials. * 26 days holiday, plus bank holiday * 5 extra days per year to buy (or sell) * 5 extra days holiday when you get married or enter a civil partnership * Additional 4% of your salary to spend on extra benefits * Award-winning digital health and wellbeing service (Help@Hand) * Company performance based bonus - rewarding company and individual performance * Company Share Scheme - open to every Vertical employee * Company Pension Scheme - 5% and we match it * Breakfast on us, every day We may just be the hardest job you've ever had, but we're confident it will be the most rewarding. Join the team today and help us shape the future of Advanced Air Mobility. Disclaimer Statement We encourage you to apply even if you may not have all the experience listed in the advert. We recognise that talent comes in various forms and we are committed to providing opportunities that create an environment of growth, diversity, and inclusion for everyone. As part of our desire to review and make our processes fair, we may ask you questions related to these aspects during the application process. For more information on how we will use your data, see our Legal section.

The Opportunity At Hitachi Energy Cooling Systems, we have global responsibility for the development and manufacturing of cooling systems for power electronics and power transmission applications. Our solutions contribute to safe and reliable operation, with customer focus and quality at the core of everything we do. Driven by the rapidly growing global demand for electricity, our business continues to expand, and we are now looking to strengthen our Electrical & Automation team in Landskrona. This is an opportunity to join a global organization focused on delivering advanced cooling systems for critical energy infrastructure. As a Project Engineer – Electrical & Automation, you will take technical responsibility for electrical and automation solutions in assigned customer projects. You will work close to customers, internal engineering teams, and production, translating customer requirements into robust and compliant design solutions. While you do not have formal personnel responsibility, you will lead the electrical scope in your projects and coordinate others in the delivery. As our production is located in Landskrona, the role is primarily on‑site, with some flexibility for remote work. How you’ll make an impact Take technical ownership of electrical and automation scope in assigned projects, ensuring delivery according to time, budget, and quality requirements. Verify that the electrical design is in accordance with customer specifications, including component selection and solution review. Design automation cabinets, low‑voltage motor control centres (MCC), and junction boxes (typical voltages: 208/400/480/690 VAC and 24–220 VDC). Create and work according to quality documentation such as process maps, work instructions, functional descriptions, and guidelines. Prepare technical specifications for suppliers and manage articles and Bills of Material (BOM) in SAP. Support factory testing, FAT, supplier evaluations, and commissioning activities (SAT), including occasional travel. Provide after‑sales technical support through troubleshooting and solution development when needed. Your background Solid experience in electrical design and automation within relevant industries such as machine manufacturing, process industry, or water and treatment plants. Post‑secondary technical education or equivalent professional experience as an electrical designer, project engineer, lead engineer, or similar role. Proven ability to independently design automation cabinets and motor control systems or other low voltage cabinets using Elprocad or similar electrical CAD tools. Experience working with redundant and high‑availability solutions (e.g. S2, R1, R2 concepts). Good knowledge of applicable standards and regulations such as the Machinery Directive (2006/42/EC), IEC 61439, IEC 61000‑6‑2 / IEC 61000‑6‑4, and CE certification. Strong proficiency in technical English, both written and spoken; Swedish language skills are considered a strong advantage. A structured, communicative, and collaborative mindset, with the ability to take responsibility and lead technical work within projects. Meriting experience Experience with design according to UL / CSA standards. Practical experience with electrical cabinet assembly or automation installation. Experience with PLC, DCS, RTU, IPC, or HMI programming or configuration. What we offer Collective agreement Flexible working time Health care and wellness allowance Fantastic career opportunities within Hitachi Energy both within Sweden and globally Mentor to support you throughout onboard phase Various trainings and education supporting employee development Diversified company with over 70+ nationalities working in Sweden Supplementary compensation for parental leave Employee Benefit Portal with thousands of discounts and perks More about us Does the role sound interesting and relevant? Apply today, We review applications on an ongoing basis. Union representatives – Sveriges Ingenjörer: Senad Dizdar, +46 (72) 2303665; Ledarna: Frank Hollstedt, +46 107-38 70 43; Unionen: Claudiu Pop, +46 (10) 7386870. All other questions can be directed to Talent Acquisition Partner Malin Johansson, malin.johansson@hitachienergy.com Due to summer vacations, the screening and selection process will begin in mid-August. Thank you for your understanding and patience during this period.

Om företaget Auto Proffsen Sverige AB är ett etablerat företag som är specialiserat på plåt-, lack-, glas- och skadereparationer av motorfordon. Verksamheten omfattar mekaniskt reparationsarbete, demontering och montering av komponenter samt återställande av fordon efter skador med hjälp av modern verkstadsutrustning och tekniska system. Vi söker nu en erfaren och engagerad underhållsmekaniker som vill arbeta med mekaniskt reparations- och underhållsarbete i en modern verkstadsmiljö. Arbetsuppgifter Som underhållsmekaniker kommer du bland annat att: Utföra demontering, montering och justering av mekaniska komponenter i samband med reparations- och återställningsarbeten. Reparera, underhålla och byta mekaniska komponenter och tekniska system. Utföra felsökning, funktionskontroll och mekaniska justeringar av komponenter och utrustning. Underhålla, kontrollera och serva verkstadens maskiner, tekniska hjälpmedel och mekaniska utrustning. Medverka i reparationsarbeten där mekaniska komponenter demonteras, återställs och monteras enligt tillverkarens tekniska anvisningar. Utföra kvalitetskontroll, provning och funktionskontroll efter avslutade reparationsarbeten. Säkerställa att samtliga arbeten utförs enligt gällande kvalitets-, säkerhets- och arbetsmiljökrav. Samarbeta med övriga medarbetare inom verkstaden för att säkerställa ett effektivt arbetsflöde och hög kvalitet. Kvalifikationer Vi söker dig som: Har erfarenhet av mekaniskt reparations- och underhållsarbete. Har god kunskap om mekaniska system, tekniska komponenter, verkstadsmaskiner och mekanisk utrustning. Har erfarenhet av demontering, montering, justering och funktionskontroll av mekaniska komponenter. Kan läsa och följa tekniska instruktioner och arbetsbeskrivningar. Arbetar självständigt, noggrant och lösningsorienterat. Har god samarbetsförmåga och ett högt kvalitetsmedvetande. Meriterande Erfarenhet av plåt-, kaross- eller skadereparationer. Erfarenhet av arbete med hydrauliska och pneumatiska verktyg samt annan verkstadsutrustning. Erfarenhet av mekaniskt reparationsarbete i verkstadsmiljö. Anställningsvillkor Heltidsanställning. Tillsvidareanställning med inledande provanställning enligt överenskommelse. Lön enligt överenskommelse och gällande kollektivavtal eller branschpraxis. English: About the Company Auto Proffsen Sverige AB is an established company specializing in vehicle body repair, painting, glass replacement, and collision repair. Our work includes mechanical repair, dismantling and assembly of components, and restoring damaged vehicles using modern workshop equipment and technical systems. We are currently looking for an experienced and dedicated Maintenance Mechanic to join our team. Duties As a Maintenance Mechanic, your responsibilities will include: Dismantling, assembling, and adjusting mechanical components during repair and restoration work. Repairing, maintaining, and replacing mechanical components and technical systems. Troubleshooting, testing, and adjusting mechanical components and equipment. Maintaining and servicing workshop machinery, technical equipment, and mechanical tools. Participating in repair work where mechanical components are dismantled, restored, and reassembled according to technical specifications. Performing quality control, testing, and functional inspections after completed repairs. Ensuring that all work is carried out in accordance with quality, safety, and workplace regulations. Cooperating with colleagues to maintain an efficient workflow and high-quality standards. Qualifications We are looking for someone who: Has experience in mechanical repair and maintenance. Has good knowledge of mechanical systems, workshop machinery, and technical equipment. Has experience in dismantling, assembling, adjusting, and testing mechanical components. Can read and follow technical instructions. Works independently, carefully, and with a problem-solving mindset. Has good teamwork skills and a strong focus on quality. Merits Experience in body, collision, or damage repair. Experience with hydraulic and pneumatic tools and workshop equipment. Experience in mechanical repair work in a workshop environment. Employment Full-time. Permanent position with an initial probationary period. Salary according to agreement and applicable collective agreement or industry practice. Persian: تخنیکر نگهداری و ترمیم – بخش ترمیمات میخانیکی درباره شرکت شرکت Auto Proffsen Sverige AB در زمینه ترمیم بدنه، رنگ، شیشه و خسارات وسایط نقلیه فعالیت می‌کند. فعالیت‌های شرکت شامل ترمیمات میخانیکی، باز و بسته نمودن قطعات و بازسازی وسایط آسیب‌دیده با استفاده از تجهیزات مدرن ورکشاپ می‌باشد. ما به یک تخنیکر با تجربه و مسئولیت‌پذیر در بخش نگهداری و ترمیم نیاز داریم. وظایف باز و بسته نمودن و تنظیم قطعات میخانیکی در جریان ترمیم. ترمیم، نگهداری و تعویض قطعات میخانیکی و سیستم‌های تخنیکی. تشخیص و رفع مشکلات میخانیکی و انجام آزمایش‌های لازم. سرویس و نگهداری ماشین‌آلات، تجهیزات و وسایل تخنیکی ورکشاپ. اشتراک در ترمیم و بازسازی قطعات مطابق دستورالعمل‌های تخنیکی. انجام کنترل کیفیت و آزمایش عملکرد پس از پایان ترمیم. رعایت معیارهای کیفیت، ایمنی و محیط کار. همکاری با سایر کارکنان جهت حفظ کیفیت و افزایش رضایت مشتری. شرایط تجربه در ترمیم و نگهداری میخانیکی. آشنایی با سیستم‌های میخانیکی، ماشین‌آلات و تجهیزات ورکشاپ. تجربه در باز و بسته نمودن و تنظیم قطعات میخانیکی. توانایی خواندن و اجرای دستورالعمل‌های تخنیکی. دقت، مسئولیت‌پذیری و توانایی کار مستقل. روحیه همکاری و تعهد به کیفیت. امتیاز محسوب می‌شود تجربه در ترمیم بدنه و خسارات وسایط. تجربه کار با تجهیزات هیدرولیکی، پنوماتیکی و سایر تجهیزات ورکشاپ. شرایط استخدام تمام‌وقت. استخدام دایمی با دوره آزمایشی. Russian: Механик по техническому обслуживанию и ремонту Обязанности Демонтаж, монтаж и регулировка механических компонентов. Ремонт, обслуживание и замена механических узлов и технических систем. Диагностика и устранение механических неисправностей. Обслуживание оборудования и механизмов мастерской. Участие в восстановительных и ремонтных работах. Контроль качества и проверка работоспособности после ремонта. Соблюдение требований качества, безопасности и охраны труда. Взаимодействие с коллегами для обеспечения эффективной работы. Urdo: مینٹیننس مکینک – مکینیکل مرمت اور دیکھ بھال ذمہ داریاں مکینیکل پرزوں کو کھولنا، جوڑنا اور ایڈجسٹ کرنا۔ مکینیکل پرزوں اور تکنیکی نظام کی مرمت، دیکھ بھال اور تبدیلی۔ خرابی کی تشخیص اور مکینیکل مسائل کا حل۔ ورکشاپ کی مشینری اور تکنیکی آلات کی دیکھ بھال۔ مرمتی اور بحالی کے کاموں میں حصہ لینا۔ مرمت کے بعد کوالٹی کنٹرول اور فنکشن ٹیسٹ انجام دینا۔ معیار، حفاظت اور ورک پلیس کے قواعد کی پابندی کرنا۔ ٹیم کے ساتھ مل کر مؤثر اور معیاری کام انجام دینا۔ Öppen för alla Vi fokuserar på din kompetens, inte dina övriga förutsättningar. Vi är öppna för att anpassa rollen eller arbetsplatsen efter dina behov.

At Dexory, we're building the future of warehouse automation. We believe real-time data will transform how goods move around the world. Our robots capture live data inside warehouses, helping companies track, measure, and locate items instantly—creating a "digital twin" of entire operations. We're a fast-growing robotics company backed by leading European investors, and we're expanding quickly as we bring this technology to customers around the world. We're looking for people who enjoy hands-on assembly work, take pride in building high-quality products, and want to develop a long-term career as an Assembly & Build Technician.  Apply now and help us build the next generation of warehouse robotics. ABOUT THE ROLE This is a hands-on, Monday to Friday role within our electro-mechanical production team based in Wallingford. As an Assembly & Build Technician, you'll help build our robots from the ground up, assembling mechanical and electrical components into finished robotic systems. You'll follow detailed build instructions, carry out quality checks, and work closely with the wider production team to ensure every robot meets our high standards. This role is ideal for someone with a minimum of 1 year of hands-on assembly or manufacturing experience who wants to continue developing their career in assembly and production within an exciting robotics company. You'll be based at our workshop in Verda Park 5 days per week. A full UK driving licence is beneficial but not essential. WHAT YOU'LL BE DOING * Building and assembling mechanical and electrical components used in our robots * Assembling complete robotic systems following detailed work instructions * Carrying out quality inspections throughout the build process * Testing assemblies and identifying any issues before final build * Supporting fault finding and rework where required * Working collaboratively with the wider production team to achieve build targets * Maintaining a clean, organised and safe working environment WHAT WE'RE LOOKING FOR ESSENTIAL * A minimum 1 year of experience in an assembly, manufacturing or production environment * Experience using hand and power tools * Good mechanical aptitude and attention to detail * Ability to read and follow work instructions accurately * Strong work ethic with a positive, reliable attitude * A collaborative team player who enjoys practical, hands-on work DESIRABLE * NVQ, Diploma or Apprenticeship in Engineering, Manufacturing or a related discipline * Experience in electro-mechanical assembly * Experience working within a quality-focused manufacturing environment * Full UK driving licence WHAT YOU'LL GET * The opportunity to build cutting-edge robotic technology used by global customers * Ongoing training and development within a growing robotics company * A supportive and collaborative production team * Long-term career development as an Assembly & Build Technician * Opportunities to broaden your technical skills as our products continue to evolve BENEFITS Starting from the interview process and continuing throughout your career with us, you'll work by our four Operating Principles: * Performance: High standards, outstanding results * Impact: Big challenges, bigger results * Commitment: All in, every time * One Team: One mission, shared success Joining Dexory isn't just about technical ability—it's about embracing challenges, working together, and helping shape the future of warehouse automation. You'll also receive: * Private healthcare via Bupa with a 24/7 medical helpline * Life insurance * Income protection * Pension: 4%+ employee contribution (with salary exchange option), 5% employer contribution * Employee Assistance Programme providing mental wellbeing, financial and legal support * 25 days annual leave * Complimentary meals provided onsite in Wallingford * Regular team events, plus snacks and refreshments in the office EQUAL OPPORTUNITIES Dexory provides equal employment opportunities to all employees and applicants. We prohibit discrimination and harassment of any kind without regard to race, colour, religion, age, sex, national origin, disability status, genetics, protected veteran status, or any other characteristic protected by applicable law. This policy applies to all aspects of employment, including recruitment, hiring, promotion, compensation, training and career development. Please note: We are unable to provide sponsorship or relocation for this role.

Want to shape the future of waterborne transport and join a world-class team? Candela is the global leader in electric hydrofoil vessels. Since 2014, we’ve gone from building our first premium electric speedboat in a small Stockholm workshop to delivering game-changing vessels around the globe. The Candela P-12 is our latest innovation - the world’s first electric hydrofoil ferry is not just operating in Stockholm, but now attracting orders from around the world. Our boats “fly” thanks to computer-guided underwater wings under the hull made out of lightweight carbon fiber. The wings lift the vessel above the water, which results in cutting energy use by up to 80%, while offering zero emissions and a far better passenger experience than traditional diesel vessels. And that’s exactly why we do this. Our mission is clear: to speed up the transition to fossil fuel–free lakes and oceans. You can be part of the amazing team in Candela now! We are looking for a Boat Builder to support Candela’s future growth ambitions. Your core responsibilities will include: * Working hands-on with boat assembly, including installation of mechanical and electrical components, mounting hardware, and final outfitting * Assembling systems such as interiors, deck equipment, and structural components according to drawings and instructions * Performing adjustments and ensuring proper fit and alignment of assembled parts * Using hand tools and power tools safely and efficiently during assembly operations * Inspecting assembled components to ensure they meet quality standards and specifications * Maintaining tools, equipment, and a clean work environment * Documenting work according to company procedures * Following safety rules and using provided personal protective equipment (PPE) * Working in an international environment – our corporate language is English (including production) What are we looking for? You are a practical and detail-oriented person who enjoys working hands-on and building high-quality products. You have experience using tools and assembling mechanical or technical components. You thrive in a production environment with a fast pace and high standards, and you take pride in delivering quality work. You are eager to learn, adaptable, and enjoy being part of a collaborative and diverse team. You are also comfortable working in a workshop environment and using PPE as required. Requirements: * Ability to communicate in English in your daily work * Experience working safely with hand tools and power tools * Ability to read and work according to technical drawings and instructions * Attention to detail and strong focus on quality * Good physical condition and ability to work hands-on, including standing for extended periods and working in tight spaces * Willingness to work in a production environment and follow safety procedures Meritorious (nice to have): * Experience from assembly work in production or workshop environments * Experience from the marine or automotive industry * Experience with installation of mechanical or electrical systems Form of employment: Full-time with initial 6 month probation period Start date: ASAP Location/base: Rotebro Team: Hull Assembly Reporting to: Hull Assembly Production Area Manager Why people love working at Candela? At Candela, we’re not just building electric vessels - we’re creating a whole new category of clean, efficient waterborne transport. You get the chance to work with cutting-edge technology, solving complex challenges, and seeing the results in action - sometimes literally, when we organize test rides for our newcomers! We’re a diverse and ambitious team of over 50 nationalities, united by a revolutionary spirit and kindness. That means we work hard, but always with humility and while having fun - whether it’s solving a manufacturing challenge, improving processes, or cheering each other on during Candela Months, our year-round calendar of bonding activities and events. We’re office-first but not office-only. We believe collaboration is most powerful when we build together, in person - but we also trust our team to work in ways that fit their life. At Candela, you’ll find a place where bold ideas are welcomed, great people are celebrated, and the ride is just as important as the destination. Recruitment process: We aim to keep our recruitment process as straightforward and efficient as possible. As an international company with English as our corporate language, the entire process is conducted in English. Therefore, please submit your application in our corporate language as well. Kindly note that we cannot process applications sent via email due to GDPR so please use our career website for you application. We welcome the opportunity to meet you!

Vill du jobba som mekanisk montör där du faktiskt bygger något från grunden och där kvalitet går före stress? Nu söker vi en noggrann och självgående montör till ett stabilt industriföretag i norra Stockholm som tillverkar industribakugnar i världsklass. Det här är ett jobb för dig som gillar ansvar, hantverk och tydliga arbetsdagar, inte löpande band. Heltid, dagtid (mån–fre) Fast arbetsplats, inga resor Start omgående Det här får du Ett stabilt arbete hos ett växande industriföretag Arbete där du monterar från grunden och ser resultatet Eget ansvar i montaget, inte bara delmoment Dagtid, vardagar, långsiktigt arbete Bra lön, kollektivavtal, pension & friskvårdsbidrag Personlig kontakt via WeStaff Sweden, inte anonym bemanning Arbetsuppgifter Du arbetar med mekanisk montering i verkstad och bygger kompletta industribakugnar. Exempel på arbetsuppgifter: Montering av stomme, luckor, vagnsystem och isolering Installation av mekaniska komponenter: motorer, fläktar, drivsystem Montering av enklare elkomponenter och givare enligt ritning Arbete utifrån montageanvisningar, ritningar och kvalitetskrav Funktionskontroller, justeringar och felsökning Samarbete med kollegor inom montering, el och kvalitet Du följer hela processen, inte bara en liten del. Vem passar i rollen? Du är en praktisk person som tar ansvar för ditt arbete och gillar när saker blir rätt från början. Vi tror att du har: Erfarenhet av mekanisk montering i industri/verkstad God vana av att läsa ritningar och jobba med små toleranser Teknisk förståelse och intresse för hur saker fungerar Förmåga att arbeta självständigt men även i team Körkort och tillgång till bil Svenska i tal och skrift Erfarenhet av felsökning, justering eller tekniska system är starkt meriterande, men viktigast är noggrannhet och yrkesstolthet. Bra att veta Det här jobbet passar inte dig som: Vill byta uppdrag ofta Föredrar tempo framför precision Inte trivs med ansvar Det passar perfekt för dig som vill ha ett tryggt arbete och bygga något du kan vara stolt över. Praktisk information Plats: Norra Stockholm (Upplands Väsby) Omfattning: Heltid, dagtid Start: Omgående eller enligt överenskommelse Villkor: Kollektivavtal, pension, friskvård, bra lön Ansökan - snabbt och enkelt! Låter det som något för dig? Skicka in din ansökan redan idag! Urval sker löpande och tjänsten kan komma att tillsättas innan sista ansökningsdag. Ansökan sker via vårt system, observera att vi tyvärr inte kan ta emot ansökningar via e-post. Om WeStaff Sweden Hos oss får du en trygg anställning och blir en del av ett engagerat team med över 30 års erfarenhet inom produktion och tillverkning. Vi tror på långsiktiga relationer, personlig kontakt och att du ska trivas på jobbet. WeStaff Sweden är ett auktoriserat rekryterings- och bemanningsföretag med uppdrag över hela Sverige. Vi arbetar nära både kunder och kandidater för att skapa långsiktiga och hållbara matchningar. Hos oss får du en trygg anställning med kollektivavtal, försäkringar och goda utvecklingsmöjligheter. Läs mer på www.westaff.se

TUSA Energi AB is expanding its workforce for a major industrial construction and installation project. We are now recruiting 50 skilled Welders to join our team. The work involves welding and assembly of piping systems, steel components, and mechanical structures on a construction site in Boden, Sweden. Work duties Perform welding of pipes, steel components, and industrial structures Carry out MIG/MAG, TIG, and/or stick welding depending on project needs Prepare materials, joints, and surfaces according to technical specifications Collaborate with supervisors and installation teams on-site Qualifications Minimum 1 years of experience as a welder Valid welding certificates (e.g., MIG/MAG, TIG, or MMA) are an advantage Experience in industrial or construction welding preferred Employment Conditions & Benefits Full-time employment: 40 hours per week Saturday work may occur depending on project needs Overtime compensated according to Swedish labor law and Byggnads kollektivavtal Camp accommodation provided: private room with bathroom and kitchen access Three meals per day provided by employer Internal transport between camp and worksite included Employment follows all applicable Swedish labor laws, including workplace safety regulations and mandatory employer insurances Collective agreement protections Personal protective equipment (PPE) provided ID06 registration arranged and paid by employer Collective agreement This position is covered by Byggnads kollektivavtal, ensuring regulated wages, working hours, overtime compensation, insurance coverage, and workplace conditions according to Swedish industry standards. Workplace Project sites located in Boden, Sweden. How to apply Send your CV and certificates to: info@tusaenergi.se Application period We recruit for this position on an ongoing basis and applications are reviewed continuously.

Inspect or repair turbine blades. Troubleshoot or repair mechanical, hydraulic, or electrical malfunctions related to variable pitch systems, variable speed control systems, converter systems, or related components. Climb wind turbine towers to inspect, maintain, or repair equipment. Diagnose problems involving wind turbine generators or control systems. Perform routine maintenance on wind turbine equipment, underground transmission systems, wind fields substations, or fiber optic sensing and control systems. Start or restart wind turbine generator systems to ensure proper operations. Test electrical components of wind systems with devices such as voltage testers, multimeters, oscilloscopes, infrared testers, or fiber optic equipment. Test structures, controls, or mechanical, hydraulic, or electrical systems, according to test plans or in coordination with engineers. Assist in assembly of individual wind generators or construction of wind farms. Collect turbine data for testing or research and analysis. Maintain tool and spare parts inventories required for repair, installation, or replacement services.