Sökresultat för "perform quality control"

Är du redo för nästa steg i din karriär som maskinoperatör? Hos Lernia får du chansen att arbeta med framstående företag i Skaraborg, utvecklas i en teknisk miljö och ta del av ett stöttande team. Utmana din kreativitet och tekniska skicklighet hos våra kunder i Götene med omnejd. Välkommen ombord! Om tjänsten Som maskinoperatör kommer du att arbeta på en linje med varierande uppgifter, inklusive övervakning av maskiner, avsyning av material, inställning av maskiner och materialhantering. Du kommer även att köra truck och delta i felsökning och problemlösning. Arbetstiderna består av skiftarbete i form av 2-, 3-, 4- eller 5-skift. Om dig Vi ser gärna att du har erfarenhet av att arbeta som operatör och gillar nya utmaningar, du är lösningsorienterad och praktiskt lagd. Du trivs inom industrin och är noggrann, har god teknisk förståelse och kan arbeta självständigt såväl som i team Formell kompetens Körkort Flytande i Svenska, tal och skrift. Truckkort A+B Meriterande Vi ser gärna att du har tidigare yrkeserfarenhet från industrin. Om du har en utbildning inom teknik eller industri kommer det att ge dig en stark position bland övriga kandidater. Som en av oss Som anställd bemanningskonsult hos oss får du alltid en marknadsmässig lön, semester, pensionsavsättning, försäkringar och anslutning till vårt kollektivavtal. Vi vill att du ska må bra hos oss så självklart erbjuder vi våra konsulter friskvårdsbidrag och företagshälsovård. Under din anställning har du en konsultchef som är ansvarig för ditt uppdrag och ser till att du trivs på din arbetsplats och stöttar dig samt utvecklar dig i din yrkesroll. Om Lernia Lernia är ett av Sveriges ledande bemannings- och rekryteringsföretag och finns över hela landet. Med vårt omfattande nätverk erbjuder vi spännande jobb hos attraktiva arbetsgivare och varumärken som hjälper dig att utveckla din kompetens och karriär, både på lång och kort sikt. Hur du ansöker För att söka tjänsten, scrolla ner till ansökningsformuläret nedan. Om du har några frågor eller funderingar, vänligen kontakta oss via e-post: lina.melltoft@lernia.se Urval och intervjuer sker löpande, så skicka in din ansökan redan idag! Bakgrundskontroll För vissa tjänster ingår bakgrundskontroll som en del av rekryteringsprocessen. Om du går vidare i processen kommer du behöva verifiera din identitet via BankID innan kontroll genomförs.

At Hitachi Energy, we are a leading innovator in HVDC installations, dedicated to delivering exceptional solutions and services to our clients worldwide. With a presence in over 200+ countries, our diverse team of professionals is committed to excellence, collaboration, and continuous improvement. We are proud of our rich history of success and our forward-looking approach that keeps us at the forefront of this industry. We are now seeking a dynamic and driven Factory System Test Lead to join our professional team. If you are passionate about HVDC technology, thrive in a fast-paced environment, and eager to make a significant impact, we want to hear from you! We are interested to learn more about you and what you can contribute with so don’t hesitate to apply even though you don’t meet all requirements. Your responsibilities Responsible for developing test strategies Manage the planning and execution of testing activities You will perform quality control and assurance You will have team management You will ensure compliance and standards Living Hitachi Energy's core values of safety and integrity means taking responsibility for your own actions while caring for your colleagues and the business Your background A bachelor's degree in STEM fields is preferrable You have knowledge of software tools and programming languages used in control systems PLC, SCADA, DCS It is an advantage if you have understanding of protection principles, relay coordination, and fault analysis in HVDC systems or equivalents You have excellent verbal communication skills that will allow you to report effectively and collaborate with internal and external stakeholders Proficient in both English and Swedish, with speaking and writing skills in both languages What we offer Collective agreement. Flexible working time. Health care and wellness allowance. Fantastic career possibilities within Hitachi Energy both within Sweden and globally. Mentor to support you throughout onboard phase. Various trainings and education supporting employee development. Diversified company with over 70+ nationalities working in Sweden. Supplementary compensation for parental leave. Employee Benefit Portal with thousands of discounts and perks. More benefits could be connected to this specific role. More about us Are you ready for a new exciting challenge? Does the above description sound like you? Applications will be reviewed on an ongoing basis, so don’t delay – apply today! Recruiting Manager, Niklas Berglind, niklas.berglind@hitachienergy.com will answer your questions about the position. Union representatives - Sveriges Ingenjörer: Mikael Hjort, +46 107-38 29-86; Ledarna: Frank Hollstedt, +46 107-38 70 43; Unionen: Fredrik Holmgren, +46 107-38 21 85. All other questions can be directed to Talent Acquisition Partner Magnus Rönnholm, magnus.ronnholm@hitachienergy.com

About the Company At Avaron, you get the security of permanent employment combined with the variety of working at different customers. We place specialists across everything from tech, IT and industry to project management and business support – and whatever the assignment, you have a consultant manager who is there for you and your development. About the Role You will help transform complex CAD data into high-quality visualization material used across product development and internal communication in a technically advanced commercial vehicle environment. This role sits at the intersection of engineering, visualization, and data quality, where accurate geometry, material definition, and structured datasets are essential for creating useful visual outputs. You will work in a cross-functional setup together with stakeholders in design, engineering, styling, and communication. The role gives you the chance to combine technical understanding with visual precision in an environment where your work supports both internal users and downstream teams, making it a strong opportunity if you enjoy turning complex product data into polished, visualization-ready results. Job DescriptionYou will prepare CAD data for visualization through geometry clean-up, simplification, and structured data handling. You will assign materials and set up scenes to create high-quality visualization-ready datasets. You will validate data, perform quality checks, and help ensure consistent visual and technical standards. You will create technical visualization images for internal communication and product-related use cases. You will produce and deliver structured visualization data packages to downstream stakeholders and other departments. You will collaborate closely with product design, engineering, industrial design, styling, and market-oriented stakeholders. You will contribute to the continuous improvement of visualization workflows, methods, and data standards. You will work with tools such as Deltagen, CATIA V5, and Adobe Photoshop as part of your daily work. RequirementsEngineering degree or equivalent within Mechanical Engineering, Product Development, or Industrial Design Engineering. Experience working in 3D CAD environments, preferably CATIA V5. Experience handling complex CAD assemblies and product structures. Experience from automotive or commercial vehicle development. Understanding of product development processes. Ability to work effectively in cross-functional collaboration across design, engineering, and production. Ability to translate technical data into clear visual outputs. A structured and quality-focused way of working. Fluent English. Willingness to complete a background check before the assignment starts. Nice to haveSpecialization or coursework in visualization, rendering, surface modelling, styling, or digital product presentation. Experience in visualization or rendering workflows such as Deltagen, VRED, Blender, or similar tools. Experience in image creation or post-processing with Photoshop, Illustrator, or similar tools. Experience working closely with Industrial Design, Styling, or Studio Engineering. Knowledge of material definition and visual quality control. Knowledge of Alias, Rhino, or other surface modelling tools. Knowledge of internal systems and processes in a similar vehicle development organization. Experience working with complex vehicle product structures, especially within bus or truck development. What We OfferPermanent employment at Avaron AB Occupational pension Wellness allowance of SEK 5,000 per year Application Selections are made on an ongoing basis – apply as soon as you can.

Surgical Science is a global organisation and leading provider of medical training simulations and software solutions. Surgical Science is listed on Nasdaq First North Growth Market.   Together with healthcare partners and customers in more than 90 countries, we enhance patient safety and healthcare outcomes through evidence-based, state-of-the-art simulation technology that improves clinical proficiency and performance - enabling safe and effective training without putting patients at risk.   Our solutions are used by medical training centres, universities, hospitals, and the medical device industry for practice, assessment, and certification.   With offices in Gothenburg (HQ), Stockholm, Tel Aviv, Cleveland, Cardiff, and Shenzhen, we are a fast-growing and stable organisation in a rapidly evolving world. We foster a hybrid work culture that supports onsite and remote collaboration across teams and time zones.   You'll build things with your hands. The things you build will help surgeons save lives.   Not many production jobs come with a mission like that. At Surgical Science, we manufacture medical simulation systems — the haptic feedback devices, surgical instrument simulators, and anatomical models that healthcare professionals use to train and sharpen their skills before they operate on real patients. Every unit that leaves our Gothenburg facility has to be built right. We're looking for a Production Technician to join our team. If you're someone who takes pride in precise, careful work and wants to be part of something that actually matters, read on.   What you'll actually do Assemble and test medical simulation products according to detailed technical specifications Operate production equipment and tools safely and correctly Follow standard operating procedures and work instructions — and flag it when something doesn't add up Perform quality checks on your own work and report defects clearly and accurately Keep your workstation and surroundings clean, organized, and safe Record production data accurately so the team always knows where things stand Contribute ideas and support initiatives that make the production process better over time   What you need to bring Around 2 years of experience in production, assembly, or a similar hands-on technical role Good manual dexterity and genuine attention to detail — you notice things others might miss Comfortable following technical instructions and working methodically A team-player attitude: dependable, open to feedback, and willing to ask when you're unsure Basic computer skills for production data recording Good communication in Swedish and/or English   Even better if you have Experience assembling or testing electronics, mechatronics, or precision hardware Familiarity with quality control procedures or ISO-regulated production environments Experience using ERP or production tracking systems   Where this can take you This is a real starting point, not a dead end. At Surgical Science, production technicians who show curiosity and initiative have moved into senior technician roles, specialist positions in QC, or technical support functions. You'll gain hands-on experience with some of the most sophisticated medical simulation hardware on the market — skills that travel well in the MedTech world.   Life at Surgical Science 🌍 Part of a global team with colleagues across Sweden, Israel, the US, and beyond 🏥 Products with a real-world impact — every simulator we build improves how surgeons are trained ⌚ Stable, structured working hours 📈 Opportunities to grow within the company 🤝 A team culture built on respect, curiosity, and perseverance — where no question is a stupid question   Surgical Science as an employer Surgical Science is a global and continuously expanding organisation. You will be part of a dynamic, creative environment where we make sure to allow all employees to influence and contribute with their own unique experiences and knowledge.   Guided by our core values -  curiosity, respect, and perseverance - we strive to empower our people by recognising their strengths, supporting their growth, and creating opportunities to make a real impact.   We invite you to join us on this exciting and meaningful journey - to shape the future of medical training and improve care for patients around the world.   Apply today!  If you think you would fit our fantastic team and enjoy our work environment, apply as soon as possible as recruitment is ongoing. Let us meet and work out together whether we are a match!We kindly request that you apply with a CV in English or Swedish.

About the company Avannaa Exploration Services is a Swedish consultancy company specialising in providing geosciences expertise to the Swedish mining industry. We are looking to hire a Geologist/Geotechnical Engineer for a variety of exploration and mining drilling projects. About the role The chosen candidate will work on iron-ore mining projects for a globally recognised miner, undertaking geotechnical and geological data collection on projects at different development stages ranging from early exploration to feasibility studies to advanced production stages, both at open-pit and underground operations. These projects are located in the Swedish ‘Malmfälten’ mining Provence of Northern Sweden. Main responsibilities ● Geological and geotechnical core-logging, ensuring best practice is followed ● Continued database update ● Perform adequate quality control checks of various data sets, following QA/QC protocols to ensure the highest quality of data ● Project progress and technical reporting for clients ● Drill rig management ● Participate in team technical meetings ● Ensuring continued good client and contractor relations Requirements Those who apply should be flexible and service-oriented, have a good ability to collaborate and enjoy working in a multicultural team. Superior communication, interpersonal, client service skills combined with a strong attention to detail and a high degree of integrity is required. A minimum of 2 years' experience working on mining or exploration drilling projects is a prerequisite. Understanding of core-logging best practice is required, preferably with knowledge of parameters such as Q-System, RMR, MRMR as well as general geological and structural core-logging and geochemical sampling practices. Education and qualifications The candidate must have a BSc or MSc degree in Geology or Geotechnical Engineering, with some professional experience within mining and/or mineral exploration. Good written and verbal communication skills with the ability to communicate fluently in English in both speaking and writing is mandatory. Knowledge of Swedish is advantageous. What we offer: An exciting opportunity for an independent and developing scope of work within large and interesting projects in the mining industry. Opportunity for continued competence development and support from knowledgeable colleagues and management. If you are interested in outdoor life, Northern Sweden's beautiful nature is just around the corner with many great outdoor experiences to offer in Europe’s last remaining true wilderness. Contract: 1 year with potential for a permanent position Salary: Monthly Remuneration: Negotiable based on education and experience Workdays: Monday-Friday regular office hours with occasional overtime/weekend dependent upon project requirements. Applicants please send a cover letter and CV to: careers@avannaaexplorationservices.com.

Lab Technician with experience in histology Do you have hands-on laboratory experience and a passion for generating high-quality scientific data? Do you enjoy structured experimental workflows, precision, and attention to detail, and want to play a key role in supporting innovative applications and customer projects? Join Moleculent and contribute to the successful execution of our Applications and Fee-for-Service operations! Moleculent is on an exciting mission to map cell communication at the molecular level in tissue, aiming to unlock radical new insights into human biology. This is a chance to join a focused and dedicated team with extensive experience in building successful life science companies and products. This is a permanent position based in Solna, Stockholm. We will review the applications after the vacation period. Applicants must be eligible to work in Sweden without sponsorship. JOB DESCRIPTION As a Lab Technician, Applications and Fee-for-Service at Moleculent, you will play an important role in supporting customer projects and internal application development studies. Working primarily in the laboratory, you will be responsible for sample handling, assay execution, quality control, and laboratory operations to ensure reliable, reproducible, high-quality data. Over time, you will take on increasing responsibility for independently managing Fee-for-service project workflows and supporting the scale-up of our service operations. Key responsibilities: Prepare for experiments by organizing workspaces, confirming sample lists, and ensuring required consumables and equipment are available. Receive, handle, track, label, and store FFPE tissue samples according to established SOPs. Perform experimental workflows using prepared assay kits and standardized protocols. Execute tissue staining and multiplex in situ assay workflows under established procedures. Perform assay quality control checks and review imaging results for completeness and consistency. Accurately document experimental procedures, reagents, conditions, and results to ensure full traceability. Support troubleshooting activities and contribute to workflow optimization together with Applications and R&D teams. Maintain laboratory readiness through equipment upkeep, reagent inventory management, and general lab organization. Contribute to the expansion and standardization of Fee-for-Service operations . QUALIFICATIONS To fit the role, you hold a BSc in Molecular Biology, Biotechnology, Biomedical Sciences, or a related life sciences field. Equivalent relevant work experience will also be considered. Fluent written and spoken English is required. You have experience working in a molecular biology, histology, or related laboratory environment. Experience with FFPE sample handling, immunofluorescence (IF), immunohistochemistry (IHC), or similar workflows is highly valuable. You are comfortable working according to structured SOPs and understand the importance of quality documentation and reproducible laboratory processes. Technical skills: Hands-on experience with tissue preparation, staining, microscopy, and reagent preparation. Familiarity with laboratory imaging systems and basic image data handling. Experience with quality control procedures and experimental documentation. Knowledge of laboratory organization, equipment maintenance, and chemical safety practices. Ability to follow version-controlled protocols and standardized workflows. As a person, you are highly organized, detail-oriented, and committed to delivering high-quality results. You enjoy practical laboratory work and are motivated by contributing to scientific excellence. You are proactive, reliable, and capable of working independently once trained, while also collaborating effectively with colleagues across scientific and operational teams. An adaptable mindset and eagerness to learn new technologies and workflows are important for success in this role. MOLECULENT We believe that our understanding of the molecular basis of human biology, in health and disease will increase radically in the coming ten years. This will lead to a vast improvement in therapies, and diagnostics, and a new, fundamental understanding of our own biology. Moleculent is on a mission to develop technology-enabled products that leverage new insights into the molecular foundation of human biology. https://www.moleculent.com/ Please note that Moleculent manages the recruitment process for this position. External recruitment agencies are requested to refrain from contacting us directly in this regard.

The Opportunity As our new Quality inspector you will be responsible for ensuring quality compliance of incoming materials and manufacturing activities, supporting stable production flow, and contributing to continuous improvement of operational quality processes. You will perform and coordinate quality control activities for incoming materials and manufacturing processes How You’ll Make an Impact Ensure timely inspection and release of materials to support production flow and avoid bottlenecks Identify non-conforming materials or process deviations and support containment actions Support root cause analysis and corrective actions for quality issues related to materials and operations Monitor quality performance in production and support implementation of improvement actions Collaborate with production, supply chain, and engineering to ensure quality requirements are met Support transition of inspection activities to third parties when applicable, including oversight and follow-up Your Background Technical education or equivalent practical experience in manufacturing or quality. Manufacturing or incoming quality control experience and also with inspection methods and deviation handling Knowledge in interpreting drawings, specifications, and quality requirements Experience with inspection methods and deviation handling and used to working in an industrial or manufacturing environment Basic understanding of root cause analysis and corrective actions Good knowledge in the Swedish language is mandatory (fluent or working proficiency required). English is an advantage. What We Offer Collective agreement and flexible working hours. Health care and wellness allowance. Career opportunities within Hitachi Energy, locally and globally. Mentor support during onboarding. Training and development programs. A diverse workplace with 70+ nationalities in Sweden. Supplementary parental leave compensation. Access to an Employee Benefit Portal with discounts. More About Us At Hitachi Energy, you’ll work in an exciting, collaborative environment delivering world-class technology. We value personal development and diversity, and we are committed to building a sustainable energy future. We are growing and welcome applicants who may not meet every requirement—your potential matters. Applications are reviewed on an ongoing basis, so don’t wait—apply today! For questions about the position, contact Recruiting Manager Ahmed Abujamea at ahmed.abujamea@hitachienergy.com. Union representatives: Sveriges Ingenjörer: Philip Bengtsson +46 107-38 25 17, Unionen: Michael Fosselius +46 107-38 46 19. All other questions can be directed to Talent Partner Michael Blomberg, michael.blomberg@hitachienergy.com

We are seeking a highly skilled Rotating Equipment Field and Quality Engineer to oversee the installation, commissioning, troubleshooting, and quality assurance of rotating machinery such as pumps, compressors, and motors. The role requires strong technical expertise, field experience, and a commitment to ensuring equipment is delivered and maintained to the highest standards. KEY RESPONSIBILITIES Field Engineering:  Oversee installation, alignment, and commissioning of rotating equipment at project sites.  Conduct on-site inspections, troubleshooting, and performance assessments.  Supervise contractors and vendors during mechanical equipment installation and start-up.  Provide technical support to field teams and interface with engineering and maintenance departments.  Ensure compliance with design/requirements Quality Engineering:  Perform inspections and quality control checks on rotating equipment and associated systems.  Review and approve Quality Control (QC) documentation such as ITPs, FAT/SAT reports, NCRs, and final dossiers.  Ensure compliance with engineering standards, codes (API, ISO, ASME), and project specifications.  Coordinate with suppliers to resolve quality issues and implement corrective actions. Documentation & Reporting:  Prepare detailed technical reports, site inspection reports, and quality audit summaries.  Maintain records of equipment history, failures, and corrective actions.  Support root cause analysis and continuous improvement initiatives.

Silex Microsystems is the world’s leading pure-play MEMS foundry, customizing solutions for prominent global clients in industries such as pharmaceuticals, consumer electronics, and automotive. We are currently looking for a Service Technician to join our Backend Area, helping to ensure the uptime of our machines. Read more about Silex here. About the team The Backend area is a vital part of our production, where in the area we perform all outgoing quality control of our products, conducting electrical measurements and optical inspections. We also work with blade and stealth dicing, wafer thinning, and CMP (chemical mechanical planarization). There is a team of 19 people working in the Backend area, out of which four are working with service (three Service Technicians and one Maintenance Engineer). About the role As a Service Technician at Silex, you will play a crucial role in ensuring our high-tech equipment is operational in production through maintenance, operations, and service tasks, all conducted in cleanroom environments. The equipment you will work with involves electronics, pneumatics, mechanical systems, chemistry, and gases. You will collaborate with skilled colleagues, including area managers, process engineers, and operators. Each day begins with a handover from the previous shift, after which tasks are planned and divided among the Service Technicians. There will be a mix of planned and unplanned service activities, and we are continuously working to improve the uptime of our machinery to reduce unplanned tool stops. We want you to participate in, and help drive, continuous improvements in the area. The working hours for this position will be night shift, Monday night–Friday morning 22:30–07:00. For the first couple of months you will receive training on another shift (day, evening) and then transfer to the night shift. You will be the only Service Technician from Backend on the shift, but there will be Service Technicians present working in other areas of the fab as well as operators running our machines. In this role, you will Perform preventive maintenance on equipment. Carry out diagnostics, troubleshooting, and repairs on machinery. Be responsible for scheduled and unscheduled service activities. Coordinate service activities within the area alongside the area manager and other service technicians. Support new installations as well as modifications and upgrades of existing machines. Ensure that equipment and machinery follow Silex’s policies for providing a safe work environment. We are looking for someone who Has 3+ years' work experience in equipment service and maintenance within an industrial environment. Can troubleshoot effectively, using both electrical and mechanical understanding of the equipment. Is able to read electrical drawings and use them to aid in troubleshooting. Has good reading skills in Swedish; speaking Swedish is an advantage. Is proficient in English, both written and spoken. Is able to work independently and lead oneself. Works in a meticulous, structured, and detail-oriented way. Has the drive and curiosity to learn and grow together with Silex. About the recruitment process The recruitment process is temporarily on hold due to the summer holidays. That said, you are more than welcome to submit an application over the summer, but we won’t be able to get back to you until mid- or late August. To apply, please attach your CV or LinkedIn-profile, and answer a few questions. Our process is competency-based and will include interviews, a personality and logic test and reference checks. We will also conduct a background check and drug test prior to employment.

Lyten Sweden is seeking a professional Quality Control Technician to join our R&D organization in Västerås. In this role you will be responsible for analysing materials, incoming parts, product intermediates and finalized products for R&D, production and external suppliers using a wide range of instruments. You will participates in problem solving, technical troubleshooting exercises and technical discussions where needed. Key responsibilities (including but not limited to) Write the testing plans for materials, incoming parts, product intermediates and finalized products Perform testing of control plan inspection items using a variety of laboratory instruments Perform data analysis/interpretation and report according to quality standards Be able to troubleshoot first of line problems arising on the instruments Drive method improvements; help update standard operating procedures as needed Perform regular (daily, weekly, monthly) preventive maintenance on instruments Become familiar with the fundamentals of quality assurance and quality control principles and relevant quality management system requirements (control plan, non-conformity management, deviation and change management, control samples and control charts, calibration management, ISO9001, IATF16949, ISO17025, etc.) Adhere to and ensure 5S and safety protocols are maintained within the laboratory work environment Always work with safety as first priority Requirements Qualifications and experience Bachelor´s degree (or technical school degree) in Chemistry or a technical field is preferred. Significant relevant previous laboratory and work experience. Hands-on experience using a set of relevant analytical instruments and measurement equipment. Experience within a quality control work environment is a plus. Curious, technically educated, and with an interest in a laboratory career in industry. Knowledgeable in Lean and six sigma Familiar with SPC, FMEA, Quality troubleshooting tools and problem-solving methodology Specific skills Excellent oral and written communication skills in English, Swedish is a plus User experience with Office and JIRA software

Job Scope High level purpose of function.  The Production Quality Engineer is responsible for one or more production areas to ensure across the organization that Quality Assurance principles are strictly adhered to. This involves working closely with manufacturing and engineering to support improvement processes to ensure a flawless transition into manufacturing. Specifically, to take part in the specific processes, support in their performance and results, providing technical expertise and guidance to the team to reach targets assigned. Key Responsibilities Overall areas of responsibilities and activities. Key responsibilities include (but are not limited to)  Lead quality assurance activities in production ensure that production/product quality specifications are met. Lead and train quality team members and operations on quality standards and procedures. Perform onboarding and attendance timesheets validation related to led team members. Lead problem solving and root cause analysis activities in relation to deviations and quality issues, e.g., 8D and non-conformity investigations. Contribute to FMEA reviews. Lead launch activities to ensure the deliverables of different projects. Collaborate cross-functionally on shopfloor to improve manufacturing processes and implements solutions. Monitor NCM processes and ensure closing of actions in defined time. Update and monitor the Quality Control plans for each process operation. Define and improve Work instructions and procedures for Quality related activities. Monitor quality procedures, quality KPI's, evaluate performance and make improvement proposals, i.e., Process capability: SPC and Cpk. Define and monitor MSA activities. Develop, implement, and audit standard instructions. Implement and audit standard procedures. Plan and perform product / process audits and lead action plan to comply with customer's requirements and IATF 16949 and VDA. Contribute/lead scrap reduction action plan and improvements implementation.  Accountability/Authorization ​​Budget responsibility:​ ​No​ ​​Direct reports:​ ​No​ Work Environment Responsibility: No All employees are accountable for complying with safety regulations and actively supporting a safe workplace. Requirements Educational background and previous experience required for the role. Qualifications and experience  Bachelor’s degree and a minimum of 2 years of related experience; or an advanced degree without experience; or equivalent work experience Experience of quality work in relevant industries such as, e.g. Li-ion materials, Pharmaceutical, Food and Paper industries, or automotive industries. Experience with Statistical Process Control (SPC), Failure Mode and Effects Analysis (FMEA), Control Plan (CP), Lean, Six Sigma, Quality troubleshooting tools and problem-solving methodology. Specific skills & Knowledge Excellent English skills, both written and oral, are essential. Basic Swedish and other language skills are a plus. You should have good communication skills and be able to work in close collaboration with colleagues from many different teams.   Knowledge in Quality Management Systems (QMS), such as, ISO 9001, IATF16949, and Total Quality Management (TQM) principles. Project management skills and a successful track record of leading quality projects in a manufacturing or similar environment.

Job Scope High level purpose of function. A Quality Technician leads product and process quality compliance in production line. This role is responsible for confirming key quality attributes of intermediate products and processes as well as identifying and responding to non-conformity issues in production. In addition, this role is responsible for analysing test material, incoming parts, product intermediates and finalized products for Production using a range of instruments. This role will work closely with production staff and Quality Engineers. A Quality Technician is responsible for ensuring that production processes and products meet internal and customers’ quality specifications as well as defining problems, recommending solutions and follows-up on improvements. Key Responsibilities Overall areas of responsibilities and activities . Key responsibilities include (but are not limited to)  : Lead day-to-day quality assurance activities in production ensuring that production/product quality specifications are met. Ensure control checks are completed according to control plan in defined time. Ensure robust start of production and coordinated quality handover between shifts. Ensure 5S in control and measurement areas and participate in improving 5S methodology and actions together with production team. Ensure documentation and record of product and process quality data and utilize these to improve processes. Potential to operate various measurement equipment such as a Karl Fischer, measurement by ruler or micrometre, microscopes, perform testing with measuring instruments, perform basic data analysis, interpret data and report data/results as instructed.   Interpret data and report data/results on yearly, monthly, and daily basis. Understand and execute the testing plans for material, incoming parts, product intermediates and finalized products.   Help identify problems with test material, analysis methods, and instrumentation.   Organize test results in the expected template and/or LIMS system and maintain control charts.   Be able to troubleshoot instrument on basic and advance problems and utilizing the help of suppliers or experts for more major issues.   Act on deviations and ensure coordination with customer processes. Ensure imminent containment activities and decision making in case of non-conformities and quality issues. Mentor less experienced personnel on practical aspects of the analysis methods such as sample preparation and running instruments.   Maintain the instruments to a high standard.   Ensure conformity of cleanliness requirements in process. Conduct Layered Product audit according to schedule. Contribute to improvement actions in area of responsibility. Complete supplementary tasks as seen fit by management to effectively utilize time and resource for the benefit of the business. Accountability/Authorization Budget responsibility: No Direct reports: No Work environment responsibility: No All employees are accountable for complying with safety regulations and actively supporting a safe workplace. Requirements Educational background and previous experience required for the role Qualifications and Experience Professional education (ideally in industry) is a plus. 2 years experience in manufacturing and 2 years experience in quality. Bachelor´s degree in a technical field is preferred but not required. Previous experience of quality control from automotive industry is preferred.   Familiar with Lean and Six Sigma concepts.  Familiar with SPC, FMEA, Quality troubleshooting tools and problem-solving methodology. Specific skills & Knowledge Specific knowledge of quality management systems, e.g. ISO 9001, IATF16949, TQM is preferred.   Excellent English skills, both written and oral, are essential. Basic Swedish and other language skills are a plus. You should have good communication skills and be able to work in close collaboration with colleagues from many different teams. High work ethic, critical thinking, and strong problem-solving skills are a must. This role requires the ability to stand for extended periods and perform work in controlled environments, including clean-rooms and dry-rooms, while wearing appropriate PPE. The role also requires working shifts and working in multiple process areas, according to business needs.

Are you looking for a varied laboratory role where quality, analysis and precision are in focus? At Vesta Si you have the opportunity to become part of an innovative company that develops, manufactures and sells ceramic materials. You will work in a technically exciting environment alongside dedicated colleagues, helping to ensure the high quality of the company's products. We look forward to receiving your application! About the role Vesta Si is part of the SKF Group and develops, manufactures, and supplies advanced ceramic powders and materials that play a vital role in high-precision industrial products, particularly ball and roller bearings. The Ljungaverk site employs approximately 25 people. In this role, you will work closely with colleagues in the laboratory as well as with employees across other parts of the business. Collaboration is characterized by a structured approach, a strong focus on quality and continuous improvement. You will be employed as a consultant by Academic Work and assigned to Vesta Si. This is a long-term assignment with excellent opportunities for continued professional development within the company. You are offered The opportunity to join a company making significant investments for the future A stable and long-term employer within the SKF Group A varied workday in a collaborative and down-to-earth culture A supportive and friendly team that enjoys working together Work tasks In this role, you will primarily perform routine analyses of ceramic powders as part of quality control. You will also document and report analytical results, carry out routine maintenance of laboratory equipment and help maintain an organized and efficient laboratory environment. Your responsibilities will include Performing routine quality control analyses of ceramic powders Documenting and reporting analytical results in the company's systems Conducting routine maintenance of laboratory equipment Maintaining a clean, organized and efficient laboratory environment Supporting other areas of the business with process development activities We are looking for Have a technical or scientific education at high school level Have practical laboratory experience, preferably in a materials, physics or chemistry laboratory Have good computer and IT skills Have excellent communication skills in English, written and spoken, because it is the corporate language It is considered an advantage if you have: A post-secondary degree, preferably in Materials Science, Physics or Chemistry Experience from a manufacturing industry Experience working with ISO 9001:2015 Knowledge of additional languages besides English We also value knowledge in one or more of the following areas: Analysis of ceramic materials Analysis of powdered materials As well as experience with one or more of the following analytical techniques: X-ray diffraction (XRD) X-ray fluorescence (XRF) Specific surface area analysis using gas adsorption (BET) Particle size analysis Carbon and oxygen analysis using combustion techniques Wet sieving of powders To succeed in the role, your personal skills are: Great importance will be placed on your personal qualities. To succeed in this role, you are structured, quality-conscious and responsible. You have an keen eye for details and enjoy working in a systematic and methodical way. At the same time, you are a team player who contributes to an open and collaborative culture where everyone supports one another and shares responsibility. We believe you are: Responsible Organized Helpful Our recruitment process This recruitment process is managed by Academic Work. All questions regarding the position should be directed to Academic Work. Applications are reviewed on an ongoing basis and the advertisement will be removed once a sufficient number of candidates have reached the final stage of the recruitment process. Applicants are required to submit a CV. A cover letter is not required, as it is not used as part of the selection process. The recruitment process includes two assessment tests: a personality assessment and a cognitive ability test. These assessments are used to identify candidates with the greatest potential for the role while promoting equality, diversity and a fair recruitment process.

Company description: At NKT in Karlskrona, we develop and manufacture high voltage power cables that enable the transition to renewable energy. Here, you will be part of an international engineering centre with advanced high voltage test halls, modern cable production and the cable laying vessel NKT Victoria. As Connectors, we collaborate to develop innovative technology that connects a greener and more sustainable world. NKT is headquartered in Denmark and operates in more than 30 countries.NKT - We connect a greener world. www.NKT.com. Job description:We are looking for a Laboratory Engineer for the department Material Technology in KarlskronaNKT connects a greener world with high-quality power cable technology and plays a central role in the global transition to renewable energy. At our factory in Karlskrona, we design, develop and manufacture high-voltage power cable solutions that enable a sustainable future. We are now looking for a Laboratory Engineer to join our Material Technology department, a role where you will combine laboratory work with a key responsibility for our digital lab environment.   Shape the future of our laboratory systemsAs a Laboratory Engineer at NKT, you will not only contribute with reliable and accurate test results, you will also take on a central role in developing, maintaining and supporting our Laboratory Information Management System (LIMS).   You will act as a link between laboratory users, instruments and system suppliers, ensuring that our systems support the business in an efficient and sustainable way. This is a broad and diverse role where you work both operationally and strategically.   Main resnonsibilities: Plan, perform and report laboratory work according to applicable standards and instructions Quality control of incoming material and quality assurance of manufacturing steps Operate and maintain laboratory equipment Develop, adapt and improve the LIMS environment based on business need Identify and resolve issues across system, instruments and workflows Act as main point of contact towards system suppliers and support improvements Provide user support and training in LIMS to ensure efficient daily use Handle system administration and ensure stable system performance   Who are you?You are an organized and structured colleague who enjoys working both practically in the lab and with digital tools and systems. You are curious, solution-oriented and take initiative to improve ways of working.You thrive in a role where you collaborate broadly, support colleagues and manage of both processes and systems.    Key requirements: Bachelor’s degree in engineering, chemistry, physics – or equivalent experience Good communication skills in Swedish and English, both spoken and written Experience or interest in working with databases and digital systems Structured, service-minded and comfortable supporting users   Contact and applicationNKT is committed to fostering a diverse organization and an inclusive culture where people from different backgrounds can thrive and perform at their best. You will gain exciting opportunities for career development and attractive benefits.   Read more about our offer and listen to some voices of NKT Connectors here!   We will review applications continuously, but we recommend you apply no later than 2026-08-09. An extract from the criminal record, alcohol and drug tests, along with personality and capacity tests, might be part of our recruitment process.    If you have any questions about the role or the recruitment process, please reach out to Agnes Carlsson, agnes.carlsson@nkt.com. Please note that due to the GDPR regulations we cannot accept any applications via e-mail. Due to the holiday season, we kindly ask for your understanding that our response times may be slightly longer than usual.    We collect confidential candidate experience feedback to improve our recruitment process. Your responses are for quality development only and do not affect hiring decisions.   Union representativesSveriges Ingenjörer – Christian Fisch, +46 455 56 380Unionen – Joakim Wikström, +46 734 070 243Ledarna – Roger Jönsson, +46 455 55 911   Be a Connector of the green tomorrow!   #LI-AC2 #LI-Onsite

Är du redo för nästa steg i din karriär som maskinoperatör? Hos Lernia får du chansen att arbeta med framstående företag i Skaraborg, utvecklas i en teknisk miljö och ta del av ett stöttande team. Utmana din kreativitet och tekniska skicklighet hos våra kunder i Skara med omnejd. Välkommen ombord! Om tjänsten Som maskinoperatör kommer du att arbeta på en linje med varierande uppgifter, inklusive övervakning av maskiner, avsyning av material, inställning av maskiner och materialhantering. Du kommer även att köra truck och delta i felsökning och problemlösning. Arbetstiderna består av skiftarbete i form av 2-, 3-, 4- eller 5-skift. Om dig Vi ser gärna att du har erfarenhet av att arbeta som operatör och gillar nya utmaningar, du är lösningsorienterad och praktiskt lagd. Du trivs inom industrin och är noggrann, har god teknisk förståelse och kan arbeta självständigt såväl som i team Formell kompetens Körkort Flytande i Svenska, tal och skrift. Truckkort A+B Meriterande Vi ser gärna att du har tidigare yrkeserfarenhet från industrin. Om du har en utbildning inom teknik eller industri kommer det att ge dig en stark position bland övriga kandidater. Som en av oss Som anställd bemanningskonsult hos oss får du alltid en marknadsmässig lön, semester, pensionsavsättning, försäkringar och anslutning till vårt kollektivavtal. Vi vill att du ska må bra hos oss så självklart erbjuder vi våra konsulter friskvårdsbidrag och företagshälsovård. Under din anställning har du en konsultchef som är ansvarig för ditt uppdrag och ser till att du trivs på din arbetsplats och stöttar dig samt utvecklar dig i din yrkesroll. Om Lernia Lernia är ett av Sveriges ledande bemannings- och rekryteringsföretag och finns över hela landet. Med vårt omfattande nätverk erbjuder vi spännande jobb hos attraktiva arbetsgivare och varumärken som hjälper dig att utveckla din kompetens och karriär, både på lång och kort sikt. Hur du ansöker För att söka tjänsten, scrolla ner till ansökningsformuläret nedan. Om du har några frågor eller funderingar, vänligen kontakta oss via e-post: lina.melltoft@lernia.se Urval och intervjuer sker löpande, så skicka in din ansökan redan idag! Bakgrundskontroll För vissa tjänster ingår bakgrundskontroll som en del av rekryteringsprocessen. Om du går vidare i processen kommer du behöva verifiera din identitet via BankID innan kontroll genomförs.

The Consultant will perform services as a Senior Electrical & Instrumentation Inspector within industrial construction projects. The work includes inspection and quality control of electrical and instrumentation installations, ensuring compliance with project specifications, applicable regulations, and quality standards. The Consultant will support installation, testing, and commissioning activities, verify contractor work, document inspections and non-conformities, and collaborate with project teams to ensure the safe and successful execution of the project.